Bioactivity and mechanical properties of plasma-sprayed coatings of bioglass powders
Bioactive glass powders were prepared from four different types of oxides (SiO2, P2O5, CaO
and MgO). These oxides were mixed, melted and milled to produce two compositions of a …
and MgO). These oxides were mixed, melted and milled to produce two compositions of a …
Surface characterization and mechanical properties' evaluation of boride-dispersed nickel-based coatings deposited on copper through thermal spray routes
P Sharma, JD Majumdar - Journal of thermal spray technology, 2012 - Springer
The present study concerns understanding the microstructures and wear resistance of nickel-
based alloy (Ni 68.4, Cr 17, B 3.9, Si 4.9, and Fe 5.8) coatings on copper developed by …
based alloy (Ni 68.4, Cr 17, B 3.9, Si 4.9, and Fe 5.8) coatings on copper developed by …
[HTML][HTML] Influencia de los esfuerzos residuales en la adherencia de recubrimientos de Al2O3-40% TiO2 depositados mediante proyección térmica por combustión
En este trabajo se estudió la influencia de la temperatura de precalentamiento del sustrato y
del espesor de la capa sobre los esfuerzos residuales y el efecto de ellos en la resistencia …
del espesor de la capa sobre los esfuerzos residuales y el efecto de ellos en la resistencia …
Case Study of Thermal Stress Distribution Within Coating Applied on Aluminum Plain Clutch Plate by Thermal Spray Coating Technique
P Jablonski, P Czajka, A Patalas, R Talar… - Advances in …, 2018 - Springer
In this paper, information about the durability of friction clutches under high heat conditions
was described. As a way to extend their life and performance, thermal spray coating method …
was described. As a way to extend their life and performance, thermal spray coating method …
Structural FEM analysis of thermal sprayed coatings under conditions of contact pressure and high temperature
P Jabłoński, P Czajka - Proceedings of 5th International Conference on …, 2017 - Springer
State of art in the field of wear resistance indicate that, coatings produced with thermal spray
methods, can significantly contribute to increase wear rate under conditions of wide range of …
methods, can significantly contribute to increase wear rate under conditions of wide range of …
고속화염용사(HVOF) 공정을이용한엔진부품용내마모WC 코팅에대한연구
김주성， 서영재， 신상희， 정기환， 임동필 - 한국트라이볼로지학회학술 …, 2021 - dbpia.co.kr
산업용 엔진은 시장의 소형화, 고출력화 추세에 따라 요소 부품들은 점점 더 가혹해지는 작동
조건에서도 보다 높은 내구성을 유지할 것이 요구되고 있다. 특히, 엔진 밸브트레인 시스템 요소 …
조건에서도 보다 높은 내구성을 유지할 것이 요구되고 있다. 특히, 엔진 밸브트레인 시스템 요소 …