Fusion-based additive manufacturing (AM) has significantly grown to fabricate Nickel-based
superalloys with design freedom across multiple length scales. Several phenomena such as …

Inconel superalloys are one of the main classes of materials with good potential for
production using the additive manufacturing process of laser powder bed fusion (PBF-LB) …

The adaptation of additive manufacturing (AM) for Ni-based superalloys has gained
significance in aerospace and power-generation industries due to the ability to fabricate …

Additively manufactured high-entropy alloys generally suffer from low strength and/or poor
ductility. In this work, by leveraging the good castability of eutectic high entropy alloys and …

In this presented work, the effects of different heat treatments on the anisotropic mechanical
properties of Inconel 718 (IN718) fabricated by laser powder bed fusion (LPBF) and laser …

Nickel matrix composites (NMCs) have received much attention as they show excellent high
temperature performances, which could meet the demand for hot-end components in severe …

Abstract Selective Laser Melting (SLM) is a uniquely advantageous method to prepare
Oxide Dispersion Strengthened (ODS) superalloys. In this paper, IN718 powder and 1 wt …

AlSi10Mg-based nanocomposites were fabricated by laser powder bed fusion (LPBF)
additive manufacturing with the addition of 1 wt% Gd 2 O 3 and Er 2 O 3 nanoparticles. The …

The substantial growth of laser powder bed fusion (LPBF) technology has partly been driven
by its opportunity to provide high-performance complex design solutions with outstanding …

Few attempts have been made so far to develop modifiers for in situ use in Inconel 718 PBF-
LB/M fabrication. Reports show an increase in tensile strength compared to unmodified …