Fusion welding causes joint deterioration when joining aluminum alloys, which limits the use
of aluminum alloy components in high-end equipment. This paper focuses on an overview of …

In-situ rolling friction stir welding (IRFSW) was proposed to improve corrosion resistance of
7075-T6 aluminum alloy joint via microstructural design and residual stress regulation. The …

The demand for dissimilar joining of steel grades, namely austenitic stainless steels to low-
alloy steels, may increase in near future owing to the fact that the storing of LNG is currently …

Heat input is extremely important for achieving joints with high mechanical properties in
ferritic stainless steels. Thus, one of the objectives of this study is to show the effect of heat …

Metal 3D printing through laser powder bed fusion (L-PBF) has revolutionised the
manufacturing industry. However, size limitations and production costs persist as challenges …

In this study, continuous wave (CW) and pulsed wave (PW) lasers (pulse frequencies of 5,
50, and 500 Hz) were used to weld TC4 alloy joints, and the microstructure and corrosion …

Abstract The 7075-T6 aluminum (Al) alloy is a high-strength material with great application
potential. However, the tensile strength and elongation of its arc-welded joints are severely …

Abstract 7075 aluminum alloy has poor weldability and low joint quality, which seriously
restricts its development. In this work, laser-TIG (tungsten inert gas) hybrid with …

Studying the laser welding (LW) of three-dimensional printed materials is of important
significance for developing the composite manufacturing of large structures that combines …

In-situ synthesis ZrC and TiC reinforced AlCoCrFeNiTiZr–based high entropy alloy (HEA)
coatings were successfully synthesized on R60702 using pulsed–laser cladding. The effects …