Titanium alloys have been widely used in many industrial clusters such as automotive,
aerospace and biomedical industries due to their excellent comprehensive properties. In …

Dynamic transformation was first predicted by Gegel and Nadiv during hot deformation of a
Ti-6Al-2Sn-4Zr-2Mo alloy. Later it was observed in near alpha and two-phase titanium …

The hot deformation behavior of a nickel-based superalloy was investigated by means of
isothermal compression tests in the strain rate range of 0.001–10 s− 1 at 1110° C …

In the present work, the high-temperature deformation behavior of a U720LI alloy was
investigated by means of hot compression tests at temperatures of 1060–1180° C, strain …

The hot deformation behavior and microstructural evolution of homogeneous annealed
AA7020 aluminum alloy were investigated by isothermal compression tests over the …

This paper advances crystallographically-based Olson-Cohen (direct γ→ α') and
deformation mechanism (indirect γ→ ε→ α') phase transformation models for predicting …

The objective of the study described here is to evaluate the effect of temperature, strain rate,
and strain on the microstructure of dynamically recrystallized nickel–chromium alloy (800H) …

A metastable β Ti–10V–3Fe–3Al–0.27 O (wt.%) alloy was subjected to thermo-mechanical
processing to induce α and ω phase formation, so that the alloy can exhibit the features …

Both the critical stress and strain for initiation of dynamic recrystallization (DRX) were
determined using:(1) the strain hardening rate versus stress curve,(2) the natural logarithm …

A precise constitutive equation is essential to accurately describe the flow behavior of
aluminum alloy in numerical simulation of hot-forming process. In this study, the hot …