The use of multi-materials structures is nowadays one of the most sought solutions to
decrease weight and reduce both emission of greenhouse gases and fuel consumption in …

Since the need for the joining of dissimilar materials is increasing, the wide range of
requirements of the numerous industries would lead to the development of new welding …

Dissimilar metals of AA6013 aluminum alloy and Q235 low-carbon steel of 2.5 mm thickness
were butt joined using a 10 kW fiber laser welding system with ER4043 filler metal. The …

The DP590 steel to AA7075 Al-alloy with lap configuration is successfully joined by dual
beam laser welding-brazing without using filler metal. Through the introduction of the …

This paper presents a review of research progress on aluminum–steel dissimilar welding.
Current issues and recent developments in improving the intermetallic compound layer of …

Heterogeneous interfacial reactions were easily found along the Ti/Al interface due to high
temperature gradient during laser welding–brazing of Ti/Al dissimilar alloys. To improve the …

Dissimilar materials of H220YD galvanised high strength steel and 6008-T66 aluminium
alloy were welded by means of median frequency direct current resistance spot welding with …

A quality joining of Al alloy to steel is difficult to be obtained by fusion welding processes
owing to the large difference between melting temperatures and the formation of thick brittle …

A comparative study was carried out on GTAW AISI 316 welds fabricated by three different
filler metals including ER-317M, ER-316 and ER-308. Filler metals were selected in a way to …

Unstable weld appearance and uncontrollable interfacial compounds have significant
impact on the final properties of Al/steel butt joint obtained by traditional processes. In this …