Review of improvement of machinability and surface integrity in machining on aluminum alloys
Aluminum alloys are widely used in many industries, including aerospace, automotive, civil,
and electrical engineering. When compared to pure aluminum, most aluminum alloys have …
and electrical engineering. When compared to pure aluminum, most aluminum alloys have …
Microstructure evolution, mechanical properties, and strengthening mechanisms of 6061 aluminum alloy processed via corrugated constrained groove pressing
J Jia, Z Yang, B Xu, W Xie, Y Xu, J Luo… - Materials Science and …, 2023 - Elsevier
In this study, a corrugated constrained groove pressing (CCGP) technology based on a
semicircle groove was proposed, improving the uniformity of strain accumulation in …
semicircle groove was proposed, improving the uniformity of strain accumulation in …
[HTML][HTML] Investigating the multiscale effects of a novel post–weld composite processing treatment on minimizing weld softening in AA6061-T6 Al–alloy
The fusion welding of heat-treatable AA6061-T6 aluminum alloy results in significant joint
softening which results in the ultimate tensile strength (UTS) and elongation (El) of the …
softening which results in the ultimate tensile strength (UTS) and elongation (El) of the …
Co–Cr–Mo alloy fabricated by laser powder bed fusion process: grain structure, defect formation, and mechanical properties
In this work, a commercial Co–Cr–Mo alloy fabricated by laser powder bed fusion (LBPF)
was studied from the point of view of the microstructure of the as-built material, crack …
was studied from the point of view of the microstructure of the as-built material, crack …
[HTML][HTML] The role of α′-martensite on the variation of compressive residual stress in a gradient nanostructured austenitic stainless steel
Y He, H Zhou, W Liu, F Duan, K Shin, Y Zhao… - Materials & Design, 2024 - Elsevier
The strain-induced martensitic transformation (α′-martensite) and residual stress (RS)
introduction in the gradient nanostructured (GNS) austenitic stainless steel have been …
introduction in the gradient nanostructured (GNS) austenitic stainless steel have been …
Mechanical Properties and Microstructure of Dissimilar S355/AA6061-T6 FSW Butt Joints
W Ziółkowski, D Boroński, A Skibicki, R Stachowiak… - Materials, 2023 - mdpi.com
The aim of this paper is to analyse the mechanical properties of butt joints between S355
steel and 6061-T6 aluminium alloy, as well as their relationship to changes in the structure …
steel and 6061-T6 aluminium alloy, as well as their relationship to changes in the structure …
Corrosion characterization of the 6061 Al–Mg–Si alloy in synthetic acid rain using neutron tomography
MX Milagre, MS Pereira, AA Gomes, M Scapin… - Applied Radiation and …, 2022 - Elsevier
Neutron tomography has gained increasing importance as an imaging technique for
materials characterization. In general, neutron beams are able to show microstructure …
materials characterization. In general, neutron beams are able to show microstructure …