Sintering resistance of advanced plasma-sprayed thermal barrier coatings with strain-tolerant microstructures
Sintering is one of the key issues in the high temperature service of thermal barrier coatings
(TBCs), considering the continuously increasing operation temperature of gas-turbine for …
(TBCs), considering the continuously increasing operation temperature of gas-turbine for …
Amorphous and crystalline phase formation during suspension plasma spraying of the alumina–zirconia composite
The focus of this study is the amorphous phase formation in the alumina–yttria stabilized
zirconia composite coatings during thermal spray deposition. The investigated processes …
zirconia composite coatings during thermal spray deposition. The investigated processes …
Microstructure and Thermal Properties of Atmospheric Plasma-Sprayed Yb2Si2O7 Coating
X Zhong, Y Niu, L Huang, H Li, X Zheng, C Ding… - Journal of Thermal …, 2017 - Springer
In the present work, Yb 2 Si 2 O 7 powder was synthesized by solid-state reaction using Yb 2
O 3 and SiO 2 powders as starting materials. Atmospheric plasma spray technique was …
O 3 and SiO 2 powders as starting materials. Atmospheric plasma spray technique was …
Thermal cycling behavior of the plasma-sprayed coating of lanthanum hexaaluminate
J Sun, J Wang, X Zhou, Y Hui, S Dong, L Li… - Journal of the European …, 2018 - Elsevier
Amorphous phase is commonly found in plasma-sprayed LaMgAl 11 O 19 coating. In this
work, LaMgAl 11 O 19 coatings were deposited by atmospheric plasma spraying with …
work, LaMgAl 11 O 19 coatings were deposited by atmospheric plasma spraying with …
Numerical modeling of suspension HVOF spray
A three-dimensional two-way coupled Eulerian-Lagrangian scheme is used to simulate
suspension high-velocity oxy-fuel spraying process. The mass, momentum, energy, and …
suspension high-velocity oxy-fuel spraying process. The mass, momentum, energy, and …
Preparation, structure, mechanical properties and thermal cycling behavior of porous LaMgAl11O19 coating
J Sun, J Wang, H Zhang, J Yuan, S Dong… - Journal of Alloys and …, 2018 - Elsevier
In this work, porous LaMgAl 11 O 19 (LMA) thermal barrier coatings (TBCs) were deposited
by atmospheric plasma spraying, using the powder mixtures LMA/graphite with different …
by atmospheric plasma spraying, using the powder mixtures LMA/graphite with different …
Microstructure and thermal cycling behavior of plasma-sprayed LaMgAl11O19 coatings
J Sun, J Wang, X Zhou, S Dong, L Deng, J Jiang… - Ceramics …, 2018 - Elsevier
In this study, LaMgAl 11 O 19 (LMA) thermal barrier coatings (TBCs) were deposited by
atmospheric plasma spraying with different spraying powers. The effects of spraying power …
atmospheric plasma spraying with different spraying powers. The effects of spraying power …
Effect of heat treatment on microstructure and property of plasma-sprayed lanthanum hexaaluminate coating
J Sun, J Wang, S Dong, Y Hui, L Li, L Deng… - Journal of Alloys and …, 2018 - Elsevier
Amorphous phase is commonly found in LaMgAl 11 O 19 (LMA) coating prepared by
atmospheric plasma spraying. In order to improve their performance, the as-sprayed LMA …
atmospheric plasma spraying. In order to improve their performance, the as-sprayed LMA …
Structure property relationship of suspension thermally sprayed WC-Co nanocomposite coatings
Tribomechanical properties of nanostructured coatings deposited by suspension high
velocity oxy-fuel (S-HVOF) and conventional HVOF (Jet Kote) spraying were evaluated …
velocity oxy-fuel (S-HVOF) and conventional HVOF (Jet Kote) spraying were evaluated …
Tribological behavior of novel Al2O3-La2O3 HVOF composite coatings
The development of new coatings materials, particularly ceramic based has gained attention
for increasing the component durability of sliding component under varied environments. In …
for increasing the component durability of sliding component under varied environments. In …