Wear behavior of AlTiN coated WC tools in micromilling of Ti6Al4V alloy using vegetable oil-based nanofluids

A Roushan, US Rao, P Sahoo, K Patra, SS Rawat - Tribology International, 2023 - Elsevier
The performance of AlTiN coated WC tool with pure vegetable oil-based MQL, vegetable oil
with mono (CuO, MoS 2), and hybrid (CuO+ MoS 2) nanofluid-based MQL in micro-milling of …

Effect of arc-deposited diamond-like carbon (DLC) coating thickness on friction and size effects in high-speed micromilling of Ti6Al4V

P Sahoo, S Kumar, RK Singh, G Srinivas, V Bonu… - Tribology …, 2024 - Elsevier
Diamond-like carbon (DLC) can be considered one of the frontline coating materials for high-
speed cutting tools owing to both abrasion resistance and solid lubricant properties …

Tool surface modification methodology to improve the machinability of Ti6Al4V through combination of micro-EDM texturing and AlSi-10Mg soft coating techniques in …

A George, TS Sahu, PB Dhanish… - Proceedings of the …, 2023 - journals.sagepub.com
Machinability of Ti-6Al-4V, despite its numerous applications, is challenging owing to its
poor thermal conductivity, severe chemical affinity and strain hardening characteristics …

Cutting performance and surface quality of Ti-6Al-4V by longitudinal ultrasonic vibration-assisted high-speed dry milling with coated carbide tools

J Zhang, L Ling, D Luo, C Deng, X Huang… - … International Journal of …, 2023 - Springer
Longitudinal ultrasonic vibration-assisted high-speed dry milling (LUVAHSDM) is adopted to
improve the cutting performance and surface quality of Ti-6Al-4V (TC4). Multifaceted …

Evaluation of Tool Wear during Micro-Milling of Ultrasonically Assisted Abrasive Peened Ti-6Al-4V

R Yadav, M Kumar, ND Chakladar, AM Sidpara, S Paul - Wear, 2024 - Elsevier
When a cutting tool shears through a workpiece, the interaction causes wear of the tool
which is based on relative hardness, surface characteristics of the tool and the workpiece …

Wear characteristics of WS2 nanoparticle-assisted micro-EDM textured carbide inserts during machining of Ti6Al4V

A George, PB Dhanish, J Mathew, B Kuriachen - Tribology International, 2024 - Elsevier
The present study investigates the impact of micro-EDM based texturing techniques where
various patterns are fabricated on the rake faces of turning inserts with and without adding …

An assessment of machining performance of CAPVD-coated carbide tools in face milling of Ti-6Al-4V

A Kumar, N Tandekar, AV Gopal, K Valleti - Ceramics International, 2024 - Elsevier
The present study aims to extend the life of tungsten carbide (WC) cutting tools utilized in
face milling operations of Ti-6Al-4V by applying hard protective coatings developed using …

Investigating the high-temperature and self-lubricating properties of TiAlSiCN hard coating coordinated using double amorphous phases

X Li, G Li, S Liu, M Lan, S Sun, Q Wang - International Journal of Refractory …, 2024 - Elsevier
In this work, the competitive relationship between the double amorphous phases is
systematically investigated to increase the high-temperature wear resistance of the self …

Enhancing Tool Performance in High-Speed End Milling of Ti-6Al-4V Alloy: The Role of AlCrN PVD Coatings and Resistance to Chipping Wear

Q He, V Saciotto, JM DePaiva, MC Guimaraes… - … of Manufacturing and …, 2024 - mdpi.com
The conventional cutting tools used for machining titanium alloys normally experience rapid
tool wear, and it is generally difficult to achieve a cutting speed over 60 m/min. In this paper …

Microstructure and surface morphology change of hydrogenated diamond-like carbon coating with gradient Cr and Si under high temperature and high pressure

X Ni, Q Liu, Z Du - Journal of Physics: Conference Series, 2024 - iopscience.iop.org
A series of annealing treatments were designed to investigate the microstructure structure
and surface morphology of hydrogenated diamond-like carbon coating with gradient Cr and …