Characterization of Ba0.55Sr0.45TiO3 films as light and temperature sensors and its implementation on automatic drying system model
abstract The growth of Ba0. 55Sr0. 45TiO3 films on p-type silicon substrate with depletion
and enhancement treatments have been conducted in this research. The aims were to …
and enhancement treatments have been conducted in this research. The aims were to …
Characterization of Optical and Structural of Lanthanum Doped LiTaO3 Thin Films
Undoped, 5%, and 10% lanthanum doped lithium tantalate thin films were annealed at 550°
C temperature for 12.5 hours and their properties were characterized. The results showed …
C temperature for 12.5 hours and their properties were characterized. The results showed …
Development and application of Ba0. 5Sr0. 5TiO3 (BST) thin film as temperature sensor for satellite technology
Abstract Barium Strontium Titanate (BST) thin film has been manufactured by using chemical
solution deposition (CSD) method with annealing temperature of 850 ̊ C and variations of …
solution deposition (CSD) method with annealing temperature of 850 ̊ C and variations of …
Optical and structural properties of lanthanum doped lithium niobate thin films
Irzaman, H Sitompul, Masitoh, M Misbakhusshudur… - …, 2016 - Taylor & Francis
Optical and structural properties of lanthanum doped LiNbO3 thin films which were
deposited on p-type Si (100) by using the Chemical Solution Deposition method have been …
deposited on p-type Si (100) by using the Chemical Solution Deposition method have been …
The Effect of Ba/Sr Ratio on Electrical and Optical Properties of BaxSr(1-x)TiO3 (x = 0.25; 0.35; 0.45; 0.55) Thin Film Semiconductor
Ferroelectric BaxSr (1-x) TiO3 thin film semiconductors with Ba/Sr ratio deposited on silicon
using chemical solution deposition (CSD) method have been investigated, followed by …
using chemical solution deposition (CSD) method have been investigated, followed by …
Modified Spin Coating Method for Coating and Fabricating Ferroelectric Thin film as Sensors and Solar Cells
I Irzaman, R Siskandar… - Artifacts on Surface …, 2017 - books.google.com
Spin coating process with a modified spin coater is performed well, especially the second
generation of modified spin coater, which has a maximum value of 18,000 rpm, is able for …
generation of modified spin coater, which has a maximum value of 18,000 rpm, is able for …
The effect of indium oxide (In2O3) dopant on the electrical properties of LiTaO3 thin film-based sensor
The effect of the indium oxide (In2O3) dopant on the electrical properties of the lithium
tantalate (LiTaO3) thin film-based sensor was investigated in this study. LiTaO3 thin film was …
tantalate (LiTaO3) thin film-based sensor was investigated in this study. LiTaO3 thin film was …
Application of Ba0.5Sr0.5TiO3 (Bst) Film Doped with 0%, 2%, 4% and 6% Concentrations of RuO2 as an Arduino Nano-Based Bad Breath Sensor
Ba0. 5Sr0. 5TiO3 (BST) film doped with variations in RuO2 concentration (0%, 2%, 4%, and
6%) has been successfully grown on a type-p silicon substrate (100) using the chemical …
6%) has been successfully grown on a type-p silicon substrate (100) using the chemical …
Introductory Chapter: Ferroelectrics Material and Their Applications
I Husein, RP Jenie - Ferroelectrics and Their Applications, 2018 - books.google.com
Ferroelectricity is a symptom of inevitable electrical polarisation changes in materials without
external electric field interference. Ferroelectricity is a phenomenon exhibited by crystals …
external electric field interference. Ferroelectricity is a phenomenon exhibited by crystals …
[引用][C] Sensor suhu berbasis bahan ferroelektrik film ba0, 55 sr0, 45tio3 (bst) berbantukan mikrokontroler atmega 8535
R Siskandar - Jurnal Biofisika, 2013