With the goal to produce a hard and tough coating intended for tribological applications,
CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN …

Electrochemical impedance spectroscopy (EIS) is conducted to investigate the corrosion
behavior and mechanism of NiTi modified by carbon plasma immersion ion implantation (C …

In the present work, nanocomposite Mo-BC coatings were deposited on high speed steel
and hard metal substrates by magnetron sputtering of three targets. These coatings were …

Mo 2 BC thin films show a favourable combination of high stiffness, hardness and elastic
modulus together with moderate ductility. In this study we focused on the comparison of …

In the present study, a constitutive analysis of the evolution of the mechanical response of a
CrN/NbN superlattice coating exposed to high temperature has been performed. Parametric …

The aim of this work is to compare the thermal stability of two nanocrystalline TiC/aC: H
coatings prepared by magnetron sputtering of titanium target in acetylene containing …

C–Ti multilayer nanostructures were deposed by thermionic vacuum arc technology. The
layers consisting of about 100 nm Carbon base layer and seven 40 nm alternatively Ti and …

Elastic-plastic properties of hard ceramic coatings are of crucial importance for their practical
tribological application. In this paper, overview of the significance of the elastic-plastic …

Anotace Tato práce se věnuje studiu hybridního PVD–PECVD procesu titanového
naprašování v atmosféře obsahující argon a acetylen. PVD část tohoto depozičního procesu …

XBC (X= Mo, Ta) layers prepared by magnetron sputtering were tested. Mechanical
properties were characterized by means of nanoindentation experiments in both the static …