Gyrotrons for high-power terahertz science and technology at FIR UF
T Idehara, SP Sabchevski - Journal of Infrared, Millimeter, and Terahertz …, 2017 - Springer
In this review paper, we present the recent progress in the development of a series of
gyrotrons at the Research Center for Development of Far-Infrared Region, University of …
gyrotrons at the Research Center for Development of Far-Infrared Region, University of …
Microwave treatment in oil refining
A Porch, D Slocombe, J Beutler, P Edwards… - Applied Petrochemical …, 2012 - Springer
In this paper, we discuss the potential of using microwave techniques in the refinement of
heavy fraction of petroleums such as bunker oil. After discussing the fundamental issues …
heavy fraction of petroleums such as bunker oil. After discussing the fundamental issues …
Design of 95 GHz, 100 kW gyrotron for active denial system application
The design work of 95 GHz, 100 kW gyrotron for Active Denial System (ADS) application is
reported in this manuscript. The mode selection is performed considering the various …
reported in this manuscript. The mode selection is performed considering the various …
Design and Analysis of 25 kW (CW) Millimeter Wave Source with External Waveguide Mode Converters for Advance Material Heating/Processing
The design of millimeter wave source of 28 GHz frequency with 25 kW RF output power is
discussed here. Also the design of waveguide mode converters (rippled wall, serpentine …
discussed here. Also the design of waveguide mode converters (rippled wall, serpentine …
Selective suppression of electromagnetic modes in a rectangular waveguide by using distributed wall losses
CQ Jiao - Progress In Electromagnetics Research Letters, 2011 - jpier.org
An over-mode metal rectangular waveguide is widely used in the generation, propagation,
coupling, and transition of microwaves. When applied as the beam-wave interaction circuit …
coupling, and transition of microwaves. When applied as the beam-wave interaction circuit …
RF behavior of a 35 GHz conventional cavity gyrotron using multimode analysis and PIC simulation
In this paper, the RF behavior of a 35 GHz, TE 04 mode cylindrical cavity gyrotron is
investigated using the nonlinear multimode theory and PIC code “CST Particle Studio”. A …
investigated using the nonlinear multimode theory and PIC code “CST Particle Studio”. A …
Design and 3-D particle-in-cell simulation of a 140 GHz spatial-harmonic magnetron
NN Esfahani, M Tayarani, K Schunemann - Progress in electromagnetics …, 2013 - jpier.org
Abstract Design and 3-D numerical simulation of a 140 GHz spatialharmonic magnetron
(SHM) are presented. The effect of geometrical parameters of the side resonators of the …
(SHM) are presented. The effect of geometrical parameters of the side resonators of the …
Towards the design of 100 kW, 95 GHz gyrotron for active denial system application
The design work for 95 GHz, 100 kW gyrotron for Active Denial System (ADS) application is
presented. The mode selection is performed considering the various technical constraints …
presented. The mode selection is performed considering the various technical constraints …
Numerical design of 120 GHz, 1 MW gyrotron interaction cavity
The design and the numerical simulation of the interaction cavity for 120GHz, 1MW gyrotron
is presented. The optimizations of the cavity parameters are carried out by using the Particle …
is presented. The optimizations of the cavity parameters are carried out by using the Particle …
A reflected power isolator for a 10 kW, 28 GHz gyrotron
PP Woskov - 2013 IEEE MTT-S International Microwave …, 2013 - ieeexplore.ieee.org
An efficient reflected power isolator has been built for a 10 kW, 28 GHz gyrotron for
operation with a circularly polarized beam. It makes use of a one-dimensional copper grill …
operation with a circularly polarized beam. It makes use of a one-dimensional copper grill …