Recent studies have demonstrated the viability of quenching and partitioning (Q&P)
treatment for processing martensitic stainless steels showing an improved balance of high …

Quenching and partitioning (Q&P) treatment has been proven effective in manufacturing
advanced high strength steels with high content of retained austenite, showing the improved …

A novel quenching and partitioning (Q&P) processing was applied to the steel Fe-15Cr-3Ni-
3Mn-0.5 Si-0.12 N-0.16 C (wt.-%) with an almost fully austenitic microstructure in the solution …

Stainless steels are commonly used in hydraulic components where they may be
susceptible to cavitation erosion. In this study the cavitation erosion resistance of AISI 420 …

Two lean duplex stainless steels with different manganese contents (4 and 8 wt.%) were
deformed in the tensile mode in the temperature range of 25–300° C. The deformation …

The present article investigates the influence of chemical composition and phase fractions
on the corrosion behaviour of industrially produced quenching and partitioning (Q&P) …

Modern steel industry has great interest in developing new advanced high-strength steels,
especially for the automotive industry. The need for stronger and more ductile sheet steels …

This paper investigates microstructure and mechanical properties of a commercial
martensitic stainless steel (0.2% C–12% Cr) after the quenching and partitioning process …

The microstructural and mechanical effects of various single-step (SS) and double-step (DS)
quench and partition (Q&P) heat treatments applied to an AISI 420A low carbon martensitic …

The present work deals with the room temperature microstructure-mechanical properties
relationship in Ni-free high N transformation induced plasticity steels. The tensile properties …