[图书][B] Плазменная химико-термическая обработка поверхности стальных деталей
Л Сейдман, Е Берлин, Н Коваль - 2022 - books.google.com
Книга представляет собой подробное справочное руководство по основам плазменной
химико-термической обработки поверхности стальных деталей. В ней обобщены …
химико-термической обработки поверхности стальных деталей. В ней обобщены …
Improved wear resistance of AISI-1045 steel by hybrid treatment of plasma nitriding and post-oxidation
M Naeem, JC Díaz-Guillén, A Khalid… - Tribology …, 2022 - Elsevier
In this work, high-temperature plasma nitriding is used to improve the surface hardness and
wear resistance of AISI-1045 steel. Subsequently, plasma nitrided samples are post …
wear resistance of AISI-1045 steel. Subsequently, plasma nitrided samples are post …
Surface modification and analysis of St37 steel with Al2O3-TiO2, ZrO2, and Cr2O3 ceramic coatings: structural, mechanical, and tribological properties
B Benli, I Celik - Tribology International, 2024 - Elsevier
St37 steel, widely used in many engineering applications, experiences significant losses in
its mechanical and physical properties over time due to reasons such as corrosion or wear …
its mechanical and physical properties over time due to reasons such as corrosion or wear …
Duplex plasma treatment of AISI D2 tool steel by combining plasma nitriding (with and without white layer) and post-oxidation
AISI D2 tool steels are widely applicable in dies or tools manufacturing. Unfortunately, their
use is drastically reduced due to short lifetime. Plasma nitriding without formation of white …
use is drastically reduced due to short lifetime. Plasma nitriding without formation of white …
[HTML][HTML] Exceptional strength and wear resistance in an AA7075/TiB2 composite fabricated via friction consolidation
The friction consolidation method successfully reinforced aluminum 7075 alloy (AA7075)
with high-volume fractions (12 and 24 vol%) of titanium diboride (TiB 2) by high pressure …
with high-volume fractions (12 and 24 vol%) of titanium diboride (TiB 2) by high pressure …
Novel effect of post-oxidation on the comprehensive performance of plasma nitriding layer
J Ni, H Ma, W Wei, X An, M Yu, J Hu - Coatings, 2024 - mdpi.com
In order to enhance the comprehensive performance of plasma nitrided heavy load
components used in corrosive environments, post-oxidation was conducted under different …
components used in corrosive environments, post-oxidation was conducted under different …
Duplex treatment of plasma nitriding and plasma oxidation of plain carbon steel
F Mahboubi, M Fattah - Vacuum, 2005 - Elsevier
Plasma nitriding is a surface treatment process which is increasingly used to improve wear,
fatigue and corrosion resistance of industrial parts. Nevertheless, corrosion resistance can …
fatigue and corrosion resistance of industrial parts. Nevertheless, corrosion resistance can …
Study on dry sliding friction and wear properties of Ti2AlN/TiAl composite
T Sun, Q Wang, DL Sun, GH Wu, Y Na - Wear, 2010 - Elsevier
The dry sliding friction and wear behavior of Ti2AlN/TiAl composite (TTC) at room
temperature were investigated through the determination of coefficient of friction (COF) and …
temperature were investigated through the determination of coefficient of friction (COF) and …
Improvement of corrosion resistance of nitrided low alloy steel by plasma post-oxidation
Y Li, L Wang, D Zhang, L Shen - Applied Surface Science, 2010 - Elsevier
Post-oxidizing treatments can be performed to improve the corrosion resistance of nitrided
steel samples. In this paper, plasma nitriding treatments were performed at 540° C for 4h …
steel samples. In this paper, plasma nitriding treatments were performed at 540° C for 4h …
Effects of plasma nitriding process on the corrosion behavior of GJS700 nodular cast iron
In this paper, the effect of the plasma nitriding (PN) process on corrosion aspects of GJS700
nodular cast iron has been investigated. The gas ratio of N 2: H 2 was a variable parameter …
nodular cast iron has been investigated. The gas ratio of N 2: H 2 was a variable parameter …