G Zhang, Y Zhang, J Bao, G Yang - Carbon, 2021 - Elsevier
A novel active braze composition design route for carbon fiber reinforced carbon composite (C/C) using weak carbide former of Fe as active element based on Fe-C eutectic reaction …
D Duan, F Han, J Ding, Q Lin, C Li, C Wang… - Ceramics International, 2021 - Elsevier
This study aims to improve the hardness of solidified Cu–Sn–Ti solder alloys and reduce the erosion of diamonds caused by these solder alloys during brazing. To achieve this aim, a …
A novel brazing formulation with carbon nanotube (CNTs) incorporated in the Ni-30Si alloy is designed to enhance the self-bonding of C/SiC composites. The LSS value and Rockwell …
W Guo, J Xue, H Zhang, H Cui, Y Zhu, P Peng, B Qi - Vacuum, 2020 - Elsevier
C/C composites and Ti6Al4V alloy had been brazed and the Cu foam was used as an interlayer to inhibit the formation of brittle compounds in the brazing seam. Adding Cu foam …
B Cui, W Zhao, R Zuo, L Zhang, Z Cheng, Y Jiu… - Diamond and Related …, 2022 - Elsevier
New brazed diamond specimens were prepared by adding different types of rare earth (RE) alloys to Cu-Sn-Ti filler metal. The microstructure and mechanical properties of the filler …
Z Xue, J Shen, S Hu - Optics & Laser Technology, 2022 - Elsevier
Lap joints of polyamide 6 reinforced with 30 wt.% glass fiber (PA6GF30) and SUS444 ferritic stainless steel dissimilar materials were fabricated by laser welding, and the influence of …
W Guo, H Zhang, W Yuan, Y Zhu, H Zhang, P Peng… - Ceramics …, 2019 - Elsevier
Abstract Carbon/carbon (C/C) composite and Ti 3 Al alloy were brazed using graphene nanoplatelet (GNP) strengthened Ag-Cu-Ti composite filler. The brazed joint had the …
Z Sun, L Zhang, B Zhang, Q Chang - Materials & Design, 2020 - Elsevier
To address the brittle compounds formation issue in the brazed seam, an innovative 3- dimensional (3D) graphene sponge (GS) was selected to integrate with a single AgCuTi …
Y Wang, W Wang, J Huang, Z Ye, J Yang… - Journal of the European …, 2021 - Elsevier
A novel surface honeycomb modification was developed by pre-oxidizing the C f/SiC composite, and the honeycomb modified C f/SiC composite and stainless steel were brazed …