During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

Room-temperature (RT) formability is a key factor to broaden the applications of rolled Mg
alloy sheets in the industry. However, rolled Mg alloy sheets generally form strong basal …

A new grain orientation spread approach (GOS≤ 5°) was proposed to study DRX of a Mg-
Zn-Zr alloy during hot deformation. DRXed grains possessed random texture while the …

Abstract The Hall-Petch (H–P) relation for bimodal-grained Mg–Al–Zn alloys consisting of
both ultra-fine grains (UFGs)/fine grains (FGs) and coarse grains (CGs) is discussed …

In the current study, high strain-rate rolling (≥ 10 s− 1) has been successfully employed to
produce Mg-3Al-1Zn alloy sheets to a high reduction of 82% with a fine grain structure in a …

Plane strain compression (PSC) tests were carried out on as-cast AZ31 magnesium alloy
samples at temperatures from 250 to 400° C with different strain rates (≥ 10 s− 1). The …

This work investigates the strain rate dependence of dynamic recrystallization behaviour of
high-purity zinc in room temperature compression under strain rates of 10− 4 s-1, 10-2 s-1 …

In order for the edge cracks during the AZ31 Mg alloy rolling to be reduced, the hot-rolling
microstructure and texture were modified through multi-cross rolling (MCR) during the …

Accumulative alternating back extrusion was a potential fine-grain modification method. In
this paper, it was an innovative attempt to develop high-performance magnesium alloy sheet …

High-speed rolling (HSR) is known to improve the workability of Mg alloys significantly,
which makes it possible to impose a large reduction in a single pass without fracture. In the …