Overview of the IFMIF/EVEDA project - IOPscience Skip to content IOP Science home
Accessibility Help Search Journals Journals list Browse more than 100 science journal titles …

The necessity of a neutron source for fusion materials research was identified already in the
70s. Though neutrons induced degradation present similarities on a mechanistic approach …

During the EVEDA (engineering validation and engineering design activities) phase of the
International Fusion Materials Irradiation Facility (IFMIF) project, a 125 mA/9 MeV linear …

Abstract The Linear IFMIF Prototype Accelerator (LIPAc) is designed to accelerate 125mA of
deuteron beam to 9MeV in continuous wave (CW). The superconductive RF Linac has not …

In summer 2019 the IFMIF/EVEDA Radio Frequency Quadrupole (RFQ) accelerated its
nominal 125 mA deuteron (D+) beam current up to 5 MeV, with 90% transmission for pulses …

Fusion materials research is a worldwide endeavor as old as the parallel one working
toward the long term stable confinement of ignited plasma. In a fusion reactor, the …

The Linear IFMIF (International Fusion Materials Irradiation Facility) Prototype Accelerator
(LIPAc) is aiming at demonstrating the low energy section of a 40 MeV/125 mA IFMIF …

Featured Application An accelerator-based in situ materials surveillance on a tokamak.
Abstract In order to figure out the migration and deposition of impurities on the first wall of HL …

In various projects a large variety of RFQs has been developed, for different application, with
different average current, frequency, and energy range. In this article, a comparison, in a …

The validation of the Linear IFMIF Prototype Accelerator (LIPAc) is being conducted in
Rokkasho Fusion Institute of QST, Aomori, Japan. The beam commissioning of the novel …