Interest in magnesium alloys and their applications has risen in recent years. This trend is
mainly evident in casting applications, but wrought alloys are also increasingly coming into …

Due to the insufficient slip systems, Mg and its alloys exhibit poor ductility during plastic
deformation at room temperature. To solve this problem, alloying is considered as a most …

In this study, the microstructure and mechanical properties of the commercial magnesium
(Mg) ZK60 alloy were conducted to promote the application of Mg alloys. Scanning electron …

The tribological performances and rolling lubrication properties of SiO 2/graphene
combinations as water-based lubricant additives were evaluated using a reciprocating ball …

Regulating precipitates is still an important issue in the development of high-strength Mg
alloys, due to it determining the precipitation hardening effect. Cold deformation, as a simple …

ZK60 magnesium alloy was processed by selective laser melting (SLM), and the influences
of different process parameters on the quality of the samples were investigated. The …

This study aimed to explain the uniaxial compression of T5 heat-treated extruded ZK61
magnesium alloy at the temperatures of 298− 673 K and the strain rates of 0.001− 10 s− 1 …

Billets of pure Mg were processed using two ECAP dies with internal channel angle of 90°
and 120° for 4-passes of route Bc at 225° C. Finite element analysis was used to investigate …

In this study, the hot-deformation behavior of a die-casted Mg–Al–Zn–Ca–Mn–Zr alloy was
investigated in the temperature range of 548–673 K and the strain rate range of 0.0001–1 s …

In this study, the effect of severe plastic deformation on the Mg grain refinement and
recovery mechanism was investigated. Technical pure magnesium was deformed at room …