The synergistic effects of area ratio and microstructure on the galvanic corrosion of
A508/309 L/308 L dissimilar metals weld (DMW) are studied by a multi-analytical approach …

The microscopic scale correlation between microstructure and galvanic corrosion of low
alloy steel-A508 and its welded-309/308L stainless steel overlayer is investigated …

In this study, the microstructure and microhardness of low alloy steel A508 welded with
309/308L stainless steel are investigated. The microstructure evaluations show that the heat …

Abstract Linear Polarization Resistance was utilized to instantly evaluate the corrosion
behavior of a ferritic steel under conditions representative in oilfields (1.5 wt% NaCl solution …

The localized corrosion behaviour of an X65 subsea pipeline weldment in CO 2-saturated
formation water was studied using weldment coupon and a novelly designed weldment multi …

The paper describes the joining of rolled plates of 2205 Duplex stainless steel (DSS) by Gas
tungsten arc welding (GTAW) and shielded metal arc welding (SMAW). The development of …

A novel corrosion system defined as coupled multi-ring form sensor array (CMRSA) was
designed and fabricated to study the non-uniform corrosion performances of pipe weldment …

Heat input has a significant effect on the microstructure and corrosion performance for
welded joints. Underwater wet welding (UWW) was applied to high-strength low-alloy steels …

The corrosion behavior of the dissimilar metal welded joint (DMWJ) is highly dependent on
its heterogeneous microstructures. However, directly measuring the electrochemical …

The corrosion resistance of carbon steel weld metal with three different microstructures has
been systematically evaluated using electrochemical techniques with the simulated …