The multiple quality characteristics (QCs) of aluminum (Al) alloy to galvanized (GA) steel lap-
joint specimens were optimized in a novel metal inert gas (MIG) weld-brazing process …

Fusion welding is extensively used for joining structural assemblies, especially those with
complex geometries. However, it often results in heat-affected zones (HAZ) that are, in most …

The present work deals with the assessment of tensile strength, hardness, fracture behavior
and microstructural changes in welded Al-6061 plates. Based on that, the performance of …

Welding and riveting are the two fundamental joining processes for metals. Welding joints
have high strength than the riveting joints. But there is a high heat-affected zone in welding …

Abstract Gas Tungsten Arc Welding (GTAW) is one of the most used methods to weld
aluminum. This work investigates the influence of welding parameters on the microstructure …

The need to optimize the process parameters in Electrical Discharge Machining (EDM) for
aged AA7075 Metal Matrix Composites (AAMMCs) is evident as it impacts various aspects …

Aluminium alloys are alloys in which aluminium is the predominant metal. The typical
alloying elements copper, magnesium, magnese, silicon, tin and zinc. Al and aluminium …

L'aluminium est l'élément métallique naturel le plus abondant de l'écorce terrestre, dont il est
le 3 ème élément constitutif le plus important. Il représente environ 8%. Il n'y est présent que …

To improve welding Strength and weld quality of pure Aluminum (Al) plate, in terms of bead
width and depth of penetration an automated TIG welding system has been using, by which …

The effect of the welding process on porosity formation in SPCC carbon steel was studied by
comparing MIG, MAG, and TIG welding processes. In this work, the main consideration …