A review on the joining of SiC is given in response to the interest surge on this material for a
number of applications. Because the engineering design for the majority of applications …

Abstract A novel Y3Si2C2 material was synthesized at a relatively low temperature (900° C)
using a molten salt method for the first time, and subsequently used as the joining material …

The connection of high temperature ceramics and alloys can give full play to their respective
properties and obtain excellent composite structural components. A AgCuTi/Cu …

SiC ceramics were brazed by electric field-assisted sintering technology using
CoFeCrNiCuTi high-entropy alloy as joining filler. The effect on the interface microstructure …

Electric field-assisted sintering technology (FAST) was used to join SiC ceramic by using a
CoFeCrNiCu high-entropy alloy filler. A thin Ti film was deposited on SiC surface by physical …

A novel layered structure material, Pr 3 Si 2 C 2, was synthesized at a low temperature of
850° C using a molten salt approach for the first time, and subsequently used as the joining …

M n+ 1 AX n phases exhibit unique laminated atomic structures that result in properties
typical of both ceramics and metals. Due to their unusual characteristics, these materials …

C f/SiC composites were joined by spark plasma sintering technology using AlCoCrFeNi 2.1
eutectic high-entropy alloy as the joining filler. The typical structure of the joint could be …

High‐strength SiC joints were successfully obtained by electric current field‐assisted
sintering technique at a low temperature of 1400° C using a Pr coating (100 nm) as the initial …

Achieving the joining of SiC ceramic and Al alloy will be potential for the broad application of
high-power IGBT packages. This work proposes a novel strategy of using the commercial …