The crystallization route and kinetics of a Cu-Zr-Al bulk metallic glass (BMG), based on Cu
50 Zr 50, were investigated using in-situ synchrotron small-and wide-angle X-ray scattering …

Abstract Zr 55· 7 Cu 22· 4 Al 14.7 Ni 7.2 alloy rods with a diameter of 3 mm were prepared by
copper mold suction casting. The microstructure, thermomechanical properties and high …

This paper reports the crystallization kinetics of (Cu60Zr25Ti15) 99.3 Nb0. 7 bulk metallic
glass under isothermal conditions. Differential scanning calorimetry (DSC) has been …

The crystallization kinetics of Zr 55 Cu 30 Al 10 Ni 5 and (Zr 55 Cu 30 Al 10 Ni 5) 98 Nb 2
melt-spun metallic glasses in non-isothermal and isothermal conditions were studied by …

Abstract Zr 55.7 Cu 22.4 Ni 7.2 Al 14.7 alloy rods with a diameter of 3 mm were prepared by
copper mold suction casting. The structure, thermodynamic properties and plastic …

Abstract Zr55. 7Cu22. 4Ni7. 2Al14. 7 alloy bars were prepared by copper mold suction
casting, and the structure and thermodynamic properties of the prepared specimens were …

The crystallization kinetics of TiZrHfBe (Cu, Ni) high entropy bulk metallic glasses have been
studied using differential scanning calorimetry. Each alloy possesses a complex multi-step …

Abstract The Zr–Cu–Ni–Al system was explored in this study, and seven new compositions
of Zr-based bulk metallic glasses (BMGs) were designed by combining different proportions …

In this paper, the microstructure and mechanical properties of the nanostructured Mg-Sm-Ca
alloy processed by high-pressure torsion (HPT) were investigated. The results show that the …

Nickel-phosphorus amorphous plating can not only enhance the wearability and corrosion
resistance of the substrate but also improve the optical performance. The preparation …