Recently, two-dimensional (2D) materials and their heterostructures have been recognized
as the foundation for future brain-like neuromorphic computing devices. Two-dimensional …

Tantalum-based nanoparticles (TaNPs) have emerged as promising tools in cancer
management, owing to their unique properties that facilitate innovative imaging and …

This research explores enhancing surface integrity of high aspect ratio (AR> 5) micro-holes
machined on Inconel 718 using Shaped Tube Electrochemical Machining (STEM) by mixing …

Advanced high-strength steels (AHSSs) with Zn coatings are commonly joined by the
resistance spot welding (RSW) technique. However, Zn coatings could possibly cause the …

In electrospray deposition, a precursor solution, composed of a solute material in a volatile
carrier solvent, is atomized into a spray of charged microdroplets under the influence of a …

The 1100 aluminum alloy has been widely used in many industrial fields due to its high
specific strength, fracture toughness, excellent thermal conductivity, and corrosion …

The distribution ratio of Sn (L Sn s/m) between three slags (FeOX-SiO2, CaO-FeOX and
FeOX-CaO-SiO2) and molten copper after equilibrium was studied at 1300° C and oxygen …

Electrical discharge micromachining (EDM) poses challenges to the fatigue-life performance
of machined surfaces due to thermal damage, including recast layers, heat-affected zones …

Abstract In this study, 3.5 wt pct Si as-cast strips were prepared at various casting superheat
(20° C, 67° C, 104° C, and 120° C) using a dip test apparatus. Detailed investigations of the …

To realize the coordinated control of lubrication and heat transfer of mold flux, the accurate
measurement of initial crystallization temperature (Tc− initial) of mold flux is an essential …