The quick-emerging paradigm of additive manufacturing technology has revealed salient
advantages in enabling the tailored-design of structural components with more exceptional …

The properties and serviceability of 3D-printed metal parts depend on a variety of attributes.
These include the chemical composition, phases, morphology, spatial distributions of grain …

The passive film properties of as-received selective laser-melted 316L stainless steel
(SLMed 316L SS) without obvious pores were studied and compared with those of wrought …

In this study, TiC and B 4 C reinforced Inconel 718 (IN718) metal matrix composites (MMCs)
have been fabricated using selective laser melting (SLM). The experiments were carried out …

Laser cladding is an effective method of surface strengthening. Reasonable selection of
laser cladding process parameters is critical to the clad geometry and mechanical …

The effect of hydrogen charging on the microstructure and durability of traditional wrought
and selective laser melted 316L stainless steels (SLMed 316L SSs) in a proton exchange …

To improve the mechanical performance of popular Nickel alloys, in this study, selective
laser melting method was introduced to print IN718 alloy composites (WC/IN718) by using …

The coatings are fabricated with 90 wt% TiC+ 10 wt% Ni60 powders on Ti6Al4V alloy by
laser cladding. The effect of scanning speed on the microstructure and wear behaviors of the …

Titanium exhibits poor mechanical features such as low hardness and wear resistance. In
this research, we considerably enhance the hardness and wear resistance of Ti by a simple …

Abstract For additional strength increase, 5, 10, and 15% TiC was added to the quinary
CoCrFeMnNi high entropy alloy (HEA) at laser powers of 100, 400, and 700 watts while …