Abstract High Strength Low Alloy (HSLA) steels have gained a wide range of acceptance not
only in the automobile industries but also in the field of petrochemical transportation. They …

In this study, a full-factorial design of experiments was systematically structured to optimize
the laser processing parameters of additively manufactured high entropy alloys by …

Abstract Laser Additive Manufacturing was used to fabricate AlTiCrFeCoNi high entropy
alloy and the corrosion properties of the alloy were investigated in 3.5 wt% NaCl solution …

A novel equal atomic Ni–Al-Ti-Mn-Co-Fe–Cr high entropy alloy (HEA) was developed via
the spark plasma sintering (SPS) process. This study investigates the influence of the …

In this research, a central composite design of experiment has been carried out to
investigate the homogenizing treatment of the low-cost CuCrFeNi 2 Mn 0.5 alloy. For this …

Low carbon steel of composition 0.98 wt% quenched in water, was subjected to heat
treatment at different holding times, to improve on the mechanical properties of Dual Phase …

The statistical design of experimental techniques has been widely explored in developing
empirical methodologies. These methods are beneficial for developing appropriate …

This study presents a predictive modeling approach for the resistance spot-welding (RSW)
process of 1.2-mm-thick spot-welded sheets made of the third-generation advanced high …

A novel equal atomic Ni–Al-Ti-Mn-Co-Fe–Cr high entropy alloy (HEA) was developed via
the spark plasma sintering (SPS) process. This study investigates the influence of the …

The body frame of the automobile is an essential and critical component of a car. This part
when subjected to extreme impact, could lead to mechanical failure, which could endanger …