The cross-flow in a staggered tube bundle is computed with an LES and a transient
Reynolds stress transport model (RSTM) in 2D and 3D, with two levels of grid refinement …

A Large Eddy Simulation (LES) finite element code is developed. It is shown that the
standard numerical schemes developed for the Reynolds Averaged Navier–Stokes (RANS) …

This paper presents the results of measurements and numerical predictions of turbulent
cross-flow in a staggered tube bundle. The bundle consists of transverse and longitudinal …

An experimental investigation was performed on turbulent cross-flow in a staggered tube
bundle with transverse and longitudinal pitch-to-diameter ratios of 3.8 and 2.1, respectively …

In recent years, wall-bounded cross-flow heat exchangers have gained significant attention
for battery cooling applications. Due to similarities in geometry, these systems are often …

In this paper, we present a three-dimensional direct numerical simulation (DNS) of a
turbulent flow through a staggered tube bundle. The Navier–Stokes equations are …

Liquid jet‐array cooling modules had been designed for operation at very high heat fluxes
and were used to remove fluxes as high as 17 MW/m2. Experimental results, numerical …

Flow through a staggered array or 'bundle'of parallel rigid cylinders of diameter D is
computed with the help of a three-dimensional direct numerical simulation (DNS) at various …

The objective of this research is the prediction of forced convection across confined in-line
tube banks found in Advanced Gas-Cooled Reactor (AGR) boiler systems. The focus of this …

This paper presents the results of an investigation on the effects of wavy cylindrical tubes on
the turbulent cross-flow in a staggered tube bundle arrangement with transverse and …