Combined with infrared thermography tests, large eddy simulation was used to study the
square-wave pulsating film cooling on flat plate at the time-averaged blowing ratios of 0.5 …

A three-dimensional compressible large eddy simulation (LES) method was performed to
explore the flow and heat transfer characteristics in the hole and mixing zone of a crossflow …

An advanced film-cooling application is the thermal protection of the nozzle extension of
high-performance rocket engines. The extension wall needs be protected from the hot …

To improve knowledge of the unsteady hydrodynamic characteristics of a floating horizontal-
axis tidal turbine (HATT) in complex marine environments, a computational fluid dynamics …

The present work reports a conjugate heat transfer analysis of a turbine blade exposed to
high-temperature compressible gas flow and the convection cooling inside the blade. A …

To further explore the development of turbine secondary flows and associated losses at a
low Reynolds number, a synergy analysis was developed and implemented. Loss is defined …

The film cooling of cylindrical holes embedded in transverse trenches under superposition
has shown promise for protecting the critical components of a high-pressure turbine from …

The serpentine nozzle is widely used in military unmanned aerial vehicles to improve their
viability. The film cooling technology should be used in the serpentine nozzle to cope with …

In aeroengines, purge flow directly fed from the compressor (which bypasses the combustor)
is introduced through the disk space between blade rows to prevent the hot ingress. Higher …

This study used large eddy simulation (LES) to investigate the control mechanism of a fluidic
oscillator in the suppression of non-reattachment separation of a boundary layer from an …