The scandium effect in multicomponent alloys
S Riva, KV Yusenko, NP Lavery… - International …, 2016 - journals.sagepub.com
Despite its excellent elemental properties, lightweight nature and good alloying potential,
scandium has received relatively little attention in the manufacturing community. The …
scandium has received relatively little attention in the manufacturing community. The …
Strengthening mechanisms in AlNiSc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates
Abstract Dilute Alsingle bondSc alloys (< 0.4 wt% Sc) are creep-resistant up to∼ 300° C
owing to coherent, nanosize Al 3 Sc particles created by solid-state precipitation. By …
owing to coherent, nanosize Al 3 Sc particles created by solid-state precipitation. By …
Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy
Ni micro-alloying effects on the microstructure evolution and mechanical properties of an Al-
Zn-Mg-Cu-Sc-Zr alloy have been thoroughly investigated, by the combined use of …
Zn-Mg-Cu-Sc-Zr alloy have been thoroughly investigated, by the combined use of …
Development of alloys with high strength at elevated temperatures by tuning the bimodal microstructure in the Al–Cu–Ni eutectic system
The development of high-strength aluminum alloys that can operate at 250° C and beyond
remains a challenge to the materials community. In this paper we report preliminary …
remains a challenge to the materials community. In this paper we report preliminary …
Phase equilibria and mechanical properties in multicomponent Al–Ni–X (X= Fe, Cr) alloys
The present study reports the microstructure evolution in multicomponent Al–Ni–X (X= Fe,
Cr) alloys. The X-ray diffraction characterization technique and electron microscope …
Cr) alloys. The X-ray diffraction characterization technique and electron microscope …
Evolution of bimodal microstructure and high-temperature wear resistance of Al-Cu-Ni alloys
We report excellent high-temperature (300° C) wear resistance of copper mold-cast Al 80 Cu
15 Ni 5 and Al 75 Cu 15 Ni 10 alloys. The evolution of a novel bimodal microstructure …
15 Ni 5 and Al 75 Cu 15 Ni 10 alloys. The evolution of a novel bimodal microstructure …
Fascinating microstructural evolution during consolidation and remarkable hardening behaviour of micro alloyed Al-Cu-Ni alloys
Ultrafine B2 NiAl and vacancy ordered phase (Al 3 Ni 2 type)(Cu) evolve during
consolidation of mechanically alloyed Al-Cu-Ni alloys without and with micro alloying …
consolidation of mechanically alloyed Al-Cu-Ni alloys without and with micro alloying …
Depth sensing indentation analyses of hypereutectic Al-10Ni—XSc (X= 0, 1, 2) alloys
MF Kilicaslan, E Karakose - Metals and Materials International, 2017 - Springer
Depth sensing indentation analyses of hypereutectic Al-10Ni alloys with different amounts of
Sc content were performed to determine the values of elastic modulus, dynamic …
Sc content were performed to determine the values of elastic modulus, dynamic …
High-Pressure Solidification of Ternary Al-Ni-Sn Alloy
X Yang, F Lv, X Wang, Z Zhang, D Zhu, Y Chen, J Ge… - Crystals, 2022 - mdpi.com
The microstructure, phase composition and mechanical properties of ternary Al-5.4 Ni-2Sn
(mass fraction) alloy solidified under different high pressures were researched. The results …
(mass fraction) alloy solidified under different high pressures were researched. The results …
Phase Evolution in Hypereutectic Al90Cu10−xNix (x = 0, 5) Alloys
S Samal, G Phanikumar - Transactions of the Indian Institute of Metals, 2015 - Springer
The present work is aimed at understanding the phase evolution of hypereutectic Al-rich Al–
Cu–Ni in situ composites consisting of ultrafine eutectic with micron scale dendrites. The …
Cu–Ni in situ composites consisting of ultrafine eutectic with micron scale dendrites. The …