The liquid phase remains poorly understood. In many cases, the densities of liquids and
their crystallized solid phases are similar, but since they are amorphous they lack the spatial …

We use x-ray photon correlation spectroscopy to investigate the structural relaxation process
in a metallic glass on the atomic length scale. We report evidence for a dynamical crossover …

The fracture toughness of glassy materials remains poorly understood. In large part, this is
due to the disordered, intrinsically non-equilibrium nature of the glass structure, which …

In this study, as-cast and cold-rolled Zr 63.78 Cu 14.72 Ni 10 Al 10 Nb 1.5 bulk metallic glass
(BMG) samples were subjected to 20, 70, 120, and 170 cryogenic thermal cycles prior to …

Two-dimensional cold rolling was performed on a bulk metallic glass (BMG) with
composition Zr 58.5 Cu 15.6 Ni 12.8 Al 10.3 Nb 2.8. The average shear band density …

The molten viscous behavior of Vitreloy 106, 106a, 105 and 101 bulk metallic glass-forming
alloys was investigated at temperatures above Tliq. Couette concentric cylinder viscometry …

Using either electropulsing (EP) or surface severe plastic deformation (SSPD) to process
metallic glasses can improve their plasticity, however, the moderate improvement in …

A major challenge for the structural applications of bulk metallic glasses (BMGs) is to
improve their fracture toughness. Here we demonstrate that by increasing the cooling rate …

Laser shock peening (LSP) with different cycles was performed on the Ti-based bulk metallic
glasses (BMGs). The sub-surface residual stress of the LSPed specimens was measured by …

Shear bands were introduced into a Zr–Ti–Cu–Ni–Al bulk metallic glass (BMG) by one-
directional cold rolling and the effect on fracture toughness anisotropy was examined. Two …