The poor mechanical and tribological properties limit the higher requirements of aluminum
alloys in engineering and industrial applications, which leads to the rapid development of …

This research delves into the effects of milling time on the properties of Mg-Ti dual matrix
composites reinforced with nano SiC powders, processed via spark plasma sintering. The …

Composite materials continually displace traditional materials in engineering. A composite
material is a combination of two or more phases that are chemically distinct and insoluble; its …

The dependence of dynamic recrystallization (DRX) behavior of Mg on the Gd content was
studied using Mg-3wt% Gd and Mg-13 wt% Gd alloys in this work. After solution treatment …

Abstract Al/Mg/Al laminate was fabricated by four-pass rolling with a total rolling reduction of
71% followed by annealing at 200° C for 1 h. Intermetallics identified as Mg 17 Al 12 and Al …

Aluminium–copper composite materials were successfully fabricated using spark plasma
sintering with Al and Cu powders as the raw materials. Al–Cu composite powders were …

Commercial powders of pure magnesium were processed by high-energy ball milling. The
microstructural and morphological evolution of the powders was studied using scanning …

Intermetallic compounds, known for their excellent hardness, conductivity, and strength,
have significant applications in aerospace and automotive industries. Hardness is a crucial …

In this study, the effects of multi-wall carbon nanotubes (MWCNTs) and the ball milling
process parameters on the structure of the Al single bond Mg alloy powders have been …

Using a metalorganic chemical vapor deposition (MOCVD) technique and a tungsten
hexacarbonyl W (CO) 6 as a precursor, a stable and continuous coating consisting of …