In 21st century with the advent of industrial revolution 4.0, the future manufacturing and
power generation industries will scale new heights. The focus of researchers and engineers …

Evaluating the recyclability of powders in additive manufacturing has been a long-term
challenge. In this study, the microstructure and mechanical properties of a nickel-based …

This study investigates the effect of 10 wt% Mo alloying of NiCrBSi hardfacing on the
microstructure and dry sliding wear performance at room temperature and elevated …

The present work focuses on high-temperature solid particle erosion and sliding wear
behaviours of WC–Cr3C2–Ni coatings deposited by atmospheric plasma spray (APS) and …

Surface roughness, microhardness, and wettability are the surface characteristics which
significantly influence the implant performance. Laser surface modification with raster scan …

Surface corrosion resistance of nickel-based superalloys after grinding is an important
consideration to ensure the service performance. In this work, robotic belt grinding is …

The erosion behaviour of a nickel-based alloy coating under high-speed hot airflow erosion
caused by propellant combustion was studied. The coating was prepared on the …

Aiming at additional improvements in the properties of Stellite 12 PTA hardfacing alloy
deposited on 4140 steel substrate, the authors have adopted a dual approach. During PTA …

In this work, numerical simulation was used to determine the scan strategy, and experiment
was applied to investigate the effect of laser powers on the microstructure and mechanical …

Lattice-structured (LS) parts allow weight reduction for aerospace and automotive
applications and can be fabricated by additive manufacturing (AM). The present work …