We investigated the influence of CuO amount (0.5–3.0 mol%), sintering temperature (900° C–
1000° C), and sintering time (2–6 h) on the low‐temperature sintering behavior of CuO …

We investigated microstructures, crystal structures, and electrical properties of high
temperature sintered (1‒x) BiNaTiO 3‒xSrTiO 3‒2BiFeO 3 (BNST100x‒2BF, x= 0.20 and …

Lead zirconate titanate (PZT) ceramics are widely used in piezoelectric applications such as
actuators, sensors, and transducers owing to their excellent piezoelectric properties …

Quenching effects on electrical and piezoelectric properties were investigated for Cu-doped
(Bi 1/2 Na 1/2) TiO 3 (BNT)-based solid solution systems, 0.90 (Bi 1/2 Na 1/2) TiO 3–0.06 …

A prototype of a multilayer actuator (MLA) was fabricated using (Bi 1/2 K 1/2) TiO 3 (BKT)
ceramics as active layers and Ag–Pd (7: 3) as inner electrodes. Then, their microstructures …

Perovskite piezoelectric ceramics Pb (Zr, Ti) O3 (PZT) have dominated the commercial
market for electromechanical devices because of their superior properties. 1), 2) However …

Abstract (Bi 0.5 Na 0.5) TiO 3 [BNT] is expected as one of candidate lead-free materials
because these ceramics show relatively good high-power piezoelectric properties. In this …

Nowadays, lead zirconate titanate, PbTiO3PbZrO3 (PZT)-based ceramics are practically
applied to many piezoelectric devices such as actuators, sensors and transducers because …

Doping effects of CuO for sintering behavior and electrical properties were investigated on
(Bi 1/2 Na 1/2) TiO 3 (BNT)-based solid solution system such as 0.90 (Bi 1/2 Na 1/2) TiO 3 …

Abstract CuO‐added (LixK0. 9− x N a0. 1) NbO3 [C (LxK0. 9− x N 0.1) N] ceramics with 0.0≤
x≤ 0.05 were well‐sintered at 960° C for 6 hours. The lattice parameters of the specimens …