State-of-the-art review on laser cladding process as an in-situ repair technique

D Raj, SR Maity, B Das - Proceedings of the Institution of …, 2022 - journals.sagepub.com
The present work reviews the laser cladding process as a repairing technique and the
conventional repairing techniques and different heat source models. In this review work, the …

Computational investigation of the transient cyclic thermal distortion of funnel shaped mould in thin slab continuous casting process

P Jayakrishna, S Chakraborty, S Ganguly… - Thermal Science and …, 2022 - Elsevier
The response of the thin slab continuous casting mould subjected to thermal and
mechanical interactions needs to be studied, since they alter the shape of the mould. A 3D …

Application of synchronized tandem welding to high-hardness armor steel

BW Seo, YC Jeong, HJ Son, CJ Kim, S Kim, YT Cho - Heliyon, 2024 - cell.com
Several studies have been conducted to improve combat vehicle capabilities, such as the
bulletproof performance of armor and fuel efficiency through weight reduction. Titanium …

Numerical simulation and experimental research on submerged arc welding of stainless steel composite plate

F Yingying, X Enqiang, Z Junfu, S Xiaoqian… - The International Journal …, 2023 - Springer
This paper focuses on optimizing the submerged arc welding encapsulation for domestic
steel mills producing bridge stainless steel composite plates. It utilizes a combination of …

Review on the behavior of various parameters on heat distribution in the SAW process

VK Aswal, JK Jain, P Sonia - Materials Today: Proceedings, 2021 - Elsevier
The submerged arc welding (SAW) process comprises a formation of an electric arc
between the wire and a weld joint surface. The electric arc and weld joint completely …

Experimental and numerical analysis of temperature distributions in SA 387 pressure vessel steel during submerged arc welding

M Makaraci, MT Senol - High Temperature Materials and Processes, 2024 - degruyter.com
The present study aims to explore experimental investigations and numerical simulations for
temperature distributions at heat-affected zones within SA 387-Gr. 11-Cl. 2 steel during the …

Recovery and recycling silica flux in submerged Arc Welding–Acceptable properties and economical correlation

K Thirunavukkarasu, V Kavimani, PM Gopal… - Silicon, 2021 - Springer
This research aims at optimum utilization of waste recycled submerged arc welding slag
along with virgin flux in place of pure virgin flux without compromising the quality of welding …

[PDF][PDF] Investigations on Wear Behaviour of AISI 4140 Hot Strip Mill Roller Hardfaced with Martensitic Stainless Steel by Submerged Arc Welding Process

RV Patel, SP Wanare, VD Kalyankar - Tribology in Industry, 2021 - tribology.rs
In the present investigation, a worn-out hot strip mill roller of AISI 4140 material has been
reconditioned by the deposition of hardfacing. The roller belongs to Arcelormittal Nippon …

Alloying the surface of AISI 2205 duplex stainless steel material by PTA welding method and making its thermomechanical investigation in ANSYS software

H Dikbas, S Taskaya - Journal of Thermal Analysis and Calorimetry, 2020 - Springer
AISI 2205 steel is a duplex stainless steel plate containing 22% Cr, 3% Mo and 5–6% Ni and
having the properties like high strength, impact toughness and corrosion resistance. In …

Estimation of residual stress in air plasma sprayed MWCNT-reinforced 8YSZ–alumina composite coating

JG Thakare, RS Mulik, MM Mahapatra - Archives of Civil and Mechanical …, 2020 - Springer
Thermal barrier coating (TBC) with Al 2 O 3 and 8YSZ as topcoat constituents has been
developed. The commercially available 8YSZ (80% wt.), Al 2 O 3 (17 and 19% wt.) and …