A status report on development of the direct methanol fuel cell (DMFC) and relevant
fundamental and applied electrochemistry is the objective of this review paper. Emphasis is …

Because the AC impedance technique, also known as electrochemical impedance
spectroscopy (EIS), is being utilized by more and more researchers in proton exchange …

Fuel cell systems have now reached a degree of technological maturity and appear destined
to form the cornerstone of future energy technologies. But the rapid advances in fuel cell …

The proton conductivity of a series of extruded Nafion membranes [of equivalent weight
(EW) of 1100 and nominal dry thickness of 51, 89, 127, and 178 μm] has been studied …

To meet the power density, reliability, and cost requirements that will enable a widespread
use of fuel cells, many research activities focus on an understanding of the thermodynamics …

Grid-scale energy storage systems are of interest as the world increases reliance on
renewable energy sources. Redox flow batteries are a type of grid-scale energy storage …

For widespread exploitation of proton exchange membrane fuel cells (PEMFCs) the cost of
the stack must be reduced, and the performance per unit volume increased. Significant cost …

An understanding of two-phase flow mechanisms in micro-channels is critical to water
management in fuel cell applications. In this work, an in situ visualization study of cathode …

The principles and trade-offs of four electrical test methods suitable for on-line measurement
of the ohmic resistance (RΩ) of fuel cells is presented: current interrupt, AC resistance, high …

The in situ resistance of Nafion membranes with different thickness was measured in one-
dimensional fuel cells as a function of current density. Except for the thin Nafion 112 …