[HTML][HTML] New design of potentially low-cost solar cells using TiO2/graphite composite as photon absorber

DY Rahman, M Rokhmat, E Yuliza, E Sustini… - International Journal of …, 2016 - Springer
We propose a solar cell design using the combination of titanium dioxide (TiO 2) and
graphite as active photon absorbing materials. TiO 2 absorbs photons of nearly ultraviolet …

Ultrafast switching in wetting properties of TiO2/YSZ/Si (001) epitaxial heterostructures induced by laser irradiation

MR Bayati, S Joshi, R Molaei, RJ Narayan… - Journal of Applied …, 2013 - pubs.aip.org
We have demonstrated dark hydrophilicity of single crystalline rutile TiO 2 (100) thin films, in
which rapid switching from a hydrophobic to a hydrophilic surface was achieved using …

Electrochemical impedance spectroscopy study of TiO2 based solar cells

S Saehana, M Muslimin, M Abdullah - Journal of Renewable and …, 2014 - pubs.aip.org
We herein report an electrochemical impedance spectroscopy study on TiO 2 based solar
cells in which a copper bridge was found to significantly reduce the resistance of the TiO 2 …

Enhancement Performance of Dye-Sensitized Solar Cells from Black Rice as Dye and Black Ink as Counter Electrode with Inserting Copper on the Space between …

E Yuliza, S Saehana, DY Rahman, M Rosi… - Materials Science …, 2013 - Trans Tech Publ
In this study, we report well performance of Dye Sensitized Solar Cell (DSSC) coated with
copper (Cu) by using the electroplating method. The Cu nanoparticle was impregnated into …

A new approach for fabricating low cost DSSC by using carbon-ink from inkjet printer and its improvement efficiency by depositing metal bridge between titanium …

S Saehana, Darsikin, E Yuliza… - Journal of Solar …, 2014 - asmedigitalcollection.asme.org
We report the fabrication of a dye-sensitized solar cell (DSSC) using low-cost materials
(carbon ink from an inkjet printer coated on glass as the counter electrode) and made by a …

Dye-sensitized solar cells (DSSC) from black rice and its performance improvement by depositing interconnected copper (copper bridge) into the space between TiO2 …

S Saehana, E Yuliza, P Arifin, K Khairurrijal… - Materials Science …, 2013 - Trans Tech Publ
Dye-sensitized solar cell (DSSC) which employed natural dye from black rice has been
successfully fabricated and improved its performance by depositing interconnected copper …

[PDF][PDF] Development of a low-cost TiO2/CuO/Cu solar cell by using combined spraying and electroplating method

M Rokhmat, E Wibowo, K Sutisna… - Journal of Mathematical …, 2018 - academia.edu
A simple method is proposed to develop a low-cost TiO2/CuO/Cu based solar cell. The cell
is made by employing a lower grade (technical grade) of TiO2 as the active material. CuO …

Small Scale DSSC Panels Design and Its Performance

S Saehana - Journal of Physics: Conference Series, 2018 - iopscience.iop.org
This study reports an effort to design dye-sensitized solar cell (DSSC) panels. The panel
was proposed using a TiO 2 layer, dye, electrolyte and counter electrode. TiO 2 layer was …

Thickness dependent studies of hetero-junction solar cell synthesized on quartz substrate by spray pyrolysis technique

N Choudhary - Indian Journal of Pure & Applied Physics (IJPAP), 2020 - op.niscpr.res.in
Variable thickness hetero-junction solar cells synthesized on quartz substrate by spray
pyrolysis technique synthesized quartz based solar cells have been found to possess cell …

The effect of micro sized graphite insertion on light absorption and output of TiO2 based solar cell

J Fauzia, IP Handayani, TI Fitriani… - AIP Conference …, 2022 - pubs.aip.org
The TiO2 based solar cells researches have attracted a lot of attention due to the simple
fabrication process and relatively low production cost. However, this type of solar cell has …