A pragmatic shift has been ongoing for the metal development of industrialization for the last
several decades. In various engineering and industrial applications, there is a high demand …

The effect of isothermal transformation temperatures on wear performances of a newly
designed high-silicon carbide-free bainitic steel was studied. Wear tests were performed by …

The dry rolling/sliding wear behaviour of Si alloyed carbide free bainitic steel austempered
at different temperatures and sliding distances has been evaluated. 60SiCr7 spring steel …

High Silicon Austempered steels (AHSS) are materials of great interest due to their excellent
combination of high strength, ductility, toughness, and limited costs. These steel grades are …

The microstructure, hardness and wear resistance of bainitic steel containing 1.0%–2.8%
Mn were investigated by means of optical microscopy, scanning electron microscopy …

In this work, the effect of holding durations (10–60min) during austempering at 300, 350 and
400° C on the structure and properties of a 0.61 C-1.71 Si-0.86 Mn steel has been studied …

Austempering is conducted below and above martensite start temperature (Ms) at the fine
and coarse prior austenite grain size (PAGS), respectively, in a low‐carbon bainitic steel …

The microstructure, hardness and sliding wear behavior of bainitic steel containing 1.0–
2.5% Si were investigated by means of the optical microscope, the scanning electron …

The mechanical properties of steel decide its applicability for a particular condition. Heat
treatment processes are commonly used to enhance the required properties of steel. The …

The effects of carbon content in the range 0.2–0.4 wt% and thermomechanical treatment
parameters on the mechanical properties and microstructures of steels containing 0.5 Si–2.0 …