The Taguchi method and analysis of variance (ANOVA) were used in this work to optimize
the response variables in dissimilar welding of AISI 316L austenitic stainless steel (316L) to …

The focus of the current article is on the microstructure and behavior of the autogenous joints
produced by ATIG welding on 6 mm thick super duplex stainless steel plates. The blending …

To improve the corrosion resistance of stainless steel, the microstructure and corrosion
resistance of a Cu-bearing 316 L stainless steel coatings prepared by laser melting …

The control of phase balance has always been a tough challenge for the welding of duplex
stainless steel, which heavily restricts its optimal serving performance in engineering. The …

Duplex stainless steels show sustainable alternative for the conventional austenitic grades,
with higher strength, higher resistance against stress corrosion cracking, and lower …

Abstract The Gas Tungsten Arc Welding (GTAW) approach is employed in this research
study to join the thin sheet (1.6 mm) of Super Duplex Stainless Steel (SDSS). Process …

The present study Hastelloy C276 welding performs using tungsten inert gas (TIG) and
activated flux-TIG (A-TIG) welding technique. A nickel (57%), molybdenum (15 to 17%) …

In demanding applications, maintaining structural integrity in dissimilar welded joints like
those between duplex stainless steel and Ni-based superalloys requires achieving the best …

In order to explore the corrosion resistance of duplex stainless steel under seawater
corrosion and the compressive stiffness of its reinforced concrete columns, this study first …

This work aimed to compare the quality and properties of the welded joints of AMg6
aluminium alloy produced via conventional TIG welding with the properties of those …