Electrodeposition fabrication of chalcogenide thin films for photovoltaic applications
Electrodeposition, which features low cost, easy scale-up, good control in the composition
and great flexible substrate compatibility, is a favorable technique for producing thin films …
and great flexible substrate compatibility, is a favorable technique for producing thin films …
Understanding the grain growth mechanism in CdS thin films by CdCl2 treatment and thermal annealing evolution
In order to upgrade the crystallinity and minimize the detrimental effect of grain boundaries
and crystals defects in thin films and solar cells concerned, an approach of chloride …
and crystals defects in thin films and solar cells concerned, an approach of chloride …
Towards halide treatment on CdS thin films for solar cell applications: An evolution to ion size impact on segregation and grain boundaries passivation
In this study, an impact of halide ion size on the physical properties of 200 nm thin thermally
evaporated CdS films is explored. The ex-situ halide treatment is performed using 0.2 M …
evaporated CdS films is explored. The ex-situ halide treatment is performed using 0.2 M …
Electrodeposition of CdS thin-films from cadmium acetate and ammonium thiosulphate precursors
AE Alam, WM Cranton, IM Dharmadasa - Journal of Materials Science …, 2019 - Springer
Cadmium sulphide (CdS) thin-films have been electrodeposited using two electrode system
to be used as the hole back diffusion barrier (hbdb) layer for graded bandgap solar cells with …
to be used as the hole back diffusion barrier (hbdb) layer for graded bandgap solar cells with …
A new configuration of vertically connecting solar cells: solar tree
Solar energy is a renewable type, clean, and inexhaustible which is sufficiently available on
the Algerian territory. The energy received daily on a horizontal surface of 1 m2 is in the …
the Algerian territory. The energy received daily on a horizontal surface of 1 m2 is in the …
Electrodeposited MnO2-NiO Composites as a Pt Free Counter Electrode for Dye-Sensitized Solar Cells
Abstract Manganese oxide-Nickel oxide (MnO 2-NiO) has been successfully deposited on
Fluorine doped Tin Oxide (FTO) glass electrode using a facile, effective and low cost …
Fluorine doped Tin Oxide (FTO) glass electrode using a facile, effective and low cost …
[HTML][HTML] SCAPS 3201 simulation of tunable heterostructured p-CdTe and n-CdS thin films-based solar cells
This paper presents a numerical simulation using SCAPS 3201 and an electrometer for the
investigation of electrical behavior at the interface of heterostructured Cadmium telluride and …
investigation of electrical behavior at the interface of heterostructured Cadmium telluride and …
X-ray diffraction analysis of a class of AlMgCu alloy using williamson–hall and scherrer methods
P Nwaokafor, KB Okeoma, OK Echendu… - Metallography …, 2021 - Springer
AlMgCu alloy samples with 70 wt.% Al and varying Cu and Mg compositions have been
fabricated. The fabricated samples were characterized by x-ray diffraction measurement and …
fabricated. The fabricated samples were characterized by x-ray diffraction measurement and …
[HTML][HTML] Investigating the effects of varying sulfur concentration on ZnSxSe1-x (0≤ x≤ 1.0) thin films prepared by photo-assisted chemical bath method
Zinc sulfur-selenide (ZnS x Se 1-x)(0≤ x≤ 1.0) thin films were grown on glass substrates
using photo-assisted chemical bath deposition technique and the deposited samples were …
using photo-assisted chemical bath deposition technique and the deposited samples were …
Variations in the physical properties of rf-sputtered CdS thin films observed at substrate temperatures ranging from 25° C to 500° C
S Lee, J Kim, S Lee, HJ Cha, CS Son, YG Son… - Nanomaterials, 2022 - mdpi.com
CdS films with a wide range of substrate temperatures as deposition parameters were
fabricated on Corning Eagle 2000 glass substrates using RF magnetron sputtering. The …
fabricated on Corning Eagle 2000 glass substrates using RF magnetron sputtering. The …