A review on Cold Metal Transfer (CMT) technology of welding
Cold metal transfer (CMT) is a novel technique of joining, which is an improvised version of
the gas metal arc welding (GMAW) techniques, in which the wire of the filler metal is …
the gas metal arc welding (GMAW) techniques, in which the wire of the filler metal is …
Experimental study on application of gas metal arc welding based regulated metal deposition technique for low alloy steel
In this work, a modified and advanced welding technique named regulated metal deposition
(RMD) has been implemented for joining ASTM A387-11-2 low alloy steel plates …
(RMD) has been implemented for joining ASTM A387-11-2 low alloy steel plates …
Experimental investigations on Inconel 718 hard-faced layer deposited over SS304 using cold metal transfer
S Gejendhiran, A Karpagaraj, DV Kumar… - Surface and Coatings …, 2023 - Elsevier
This study used the cold metal transfer (CMT) process to deposit Inconel 718 (IN718) as a
hard-facing layer on the Base Substrate (BS) of 304 stainless steel (SS304). Different …
hard-facing layer on the Base Substrate (BS) of 304 stainless steel (SS304). Different …
Some studies on nickel based Inconel 625 hard overlays on AISI 316L plate by gas metal arc welding based hardfacing process
NP Kumar, NS Shanmugam - Wear, 2020 - Elsevier
The aim of the study was to examine the characteristics of Inconel 625 hard overlays over
AISI 316L used for oil and gas industry applications. Weaving technique was adopted using …
AISI 316L used for oil and gas industry applications. Weaving technique was adopted using …
Effect of heat input on microstructure and mechanical properties of 316L stainless steel fabricated by wire arc additive manufacturing
PS Gowthaman, S Jeyakumar… - Journal of Materials …, 2024 - Springer
Abstract Wire Arc Additive Manufacturing (WAAM) as an emerging process to fabricate and
repair big objects. In this investigation, thin-walled 316L Stainless steel parts were deposited …
repair big objects. In this investigation, thin-walled 316L Stainless steel parts were deposited …
Microstructure and mechanical properties of wire arc additive manufactured bi-metallic structure
A Rajesh Kannan, S Mohan Kumar… - … and Technology of …, 2021 - journals.sagepub.com
Wire arc additive manufacturing (WAAM) with better material utilisation efficiency and higher
deposition rate was employed to fabricate bi-metallic structure (BMS) of non-stabilised …
deposition rate was employed to fabricate bi-metallic structure (BMS) of non-stabilised …
Fabrication, characterisation, and finite element analysis of cold metal transfer–based wire and arc additive–manufactured aluminium alloy 4043 cylinder
An aluminium alloy (AA) cylinder measuring 145 mm diameter (∅) and 11 mm height was
produced by wire and arc additive manufacturing (WAAM) using ER4043 filler wire and cold …
produced by wire and arc additive manufacturing (WAAM) using ER4043 filler wire and cold …
Additive manufacturing of novel Ti-30Nb-2Zr biomimetic scaffolds for successful limb salvage
Osteosarcoma is a type of bone cancer mainly observed in children and young adults
affecting 3.4 million people per year. In the present study, Ti-30Nb-2Zr, a promising next …
affecting 3.4 million people per year. In the present study, Ti-30Nb-2Zr, a promising next …
[HTML][HTML] Microstructures and properties of Al-Mg alloys manufactured by WAAM-CMT
Y Liu, Z Liu, G Zhou, C He, J Zhang - Materials, 2022 - mdpi.com
A wire arc additive manufacturing system, based on cold metal transfer technology, was
utilized to manufacture the Al-Mg alloy walls. ER5556 wire was used as the filler metal to …
utilized to manufacture the Al-Mg alloy walls. ER5556 wire was used as the filler metal to …
Evolution of in-plane stresses induced fracture behaviors of Tailor Welded Blanks subjected to non-uniformly distributed load
Y Shu, N Xiang, P Wang, T Huang, Y Wang… - Engineering Failure …, 2023 - Elsevier
Due to remarkable difference in material properties of Tailor Welded Blanks (TWBs), when
subjected to uniform forming load, severe non-uniform metal flow and strain localization …
subjected to uniform forming load, severe non-uniform metal flow and strain localization …