Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process
E Sansoucy, P Marcoux, L Ajdelsztajn… - Surface and Coatings …, 2008 - Elsevier
SiC-reinforced Al–12Si alloy coatings were produced using the Cold Gas Dynamic Spraying
process. Blends of several compositional variations of Al–12Si and SiC particles were …
process. Blends of several compositional variations of Al–12Si and SiC particles were …
Microstructure and mechanical properties of B4C reinforced Al-based matrix composite coatings deposited by CGDS and PGDS processes
M Yandouzi, AJ Böttger, RWA Hendrikx… - Surface and Coatings …, 2010 - Elsevier
Coatings of a composite material consisting of an Al–12Si matrix reinforced with 20wt.%
B4C particles were produced using Cold Gas Dynamic Spray (CGDS) and Pulsed Gas …
B4C particles were produced using Cold Gas Dynamic Spray (CGDS) and Pulsed Gas …
[PDF][PDF] A review on plasma sprayed Al-SiC composite coatings
Al and its alloys are preferred as structural components due to their high strength to weight
ratio. However, they have low wear, erosion and abrasion resistance which limit their use …
ratio. However, they have low wear, erosion and abrasion resistance which limit their use …
SiC particulate reinforced Al–12Si alloy composite coatings produced by the pulsed gas dynamic spray process: Microstructure and properties
The work presented in this paper examine the possibility of using the pulsed gas dynamic
spraying (PGDS) process as a new production technique of Al–12Si alloy coatings and (Al …
spraying (PGDS) process as a new production technique of Al–12Si alloy coatings and (Al …
Wear behaviour of thermal spray Al/SiCp coatings
Aluminium matrix composite coatings reinforced with more than 20vol.% of SiC particles
have been successfully prepared by simple and low cost oxy-acetylene thermal spraying …
have been successfully prepared by simple and low cost oxy-acetylene thermal spraying …
Influence of high velocity oxygen-fuel spraying parameters on the wear resistance of Al–SiC composite coatings deposited on ZE41A magnesium alloy
High velocity oxygen-fuel (HVOF) has been used as fabrication technique to deposit
aluminium coatings reinforced with silicon carbide particles on Mg–Zn substrates. The aim of …
aluminium coatings reinforced with silicon carbide particles on Mg–Zn substrates. The aim of …
Corrosion behaviour of Mg/Al alloys with composite coatings
A Pardo, MC Merino, M Mohedano, P Casajús… - Surface and Coatings …, 2009 - Elsevier
The corrosion behaviour of aluminium/silicon carbide (Al/SiC) composite coatings deposited
by thermal spray on AZ31, AZ80 and AZ91D magnesium-aluminium alloys was investigated …
by thermal spray on AZ31, AZ80 and AZ91D magnesium-aluminium alloys was investigated …
[HTML][HTML] Formation mechanism of gradient structure of aluminum matrix composite under static magnetic field during directional solidification
S Hu, L Hou, K Wang, Z Liao, Y Fautrelle, W Li… - Journal of Materials …, 2020 - Elsevier
Aluminum matrix composite, as a new electronic packaging material, has attracted the
attention of researchers. Effect of magnetic field on gradient structure of aluminum matrix …
attention of researchers. Effect of magnetic field on gradient structure of aluminum matrix …
Industrial applications of thermal spraying technology
PL Fauchais, JVR Heberlein, MI Boulos… - … : From Powder to Part, 2014 - Springer
At its early stages of development, thermal spray technology was mostly used for the repair,
rebuilding, retrofitting, and for surface protection against corrosion, erosion and wear. The …
rebuilding, retrofitting, and for surface protection against corrosion, erosion and wear. The …
Al/SiCp and Al11Si/SiCp coatings on AZ91 magnesium alloy by HVOF
High velocity oxygen-fuel (HVOF) thermal spray has been used to fabricate Al, Al11Si and
metal matrix composite (Al/SiCp and Al11Si/SiCp) coatings on the AZ91 Mg alloy. Taguchi …
metal matrix composite (Al/SiCp and Al11Si/SiCp) coatings on the AZ91 Mg alloy. Taguchi …