The formation and subsequent recrystallization of nanoboehmite under hydrothermal
treatment of γ-Al 2 O 3 nanopowder at a temperature of 150° C in a 1.5% HCl solution have …

A procedure for the synthesis of calcium oxide has been developed, which consists in heat
treatment of an aqueous solution of calcium acetate and d-glucose at 350 and then at 700° …

This paper describes a method for the synthesis of nanosized oxide powders exemplified by
Al 2 O 3, MgO, and SiO 2, which includes combustion of a saturated aqueous solution of …

This work is devoted to the deposition of Cr 3 C 2 chromium carbide powder on steel 35 by
electrospark treatment in titanium granules. Three mixtures of granules containing Cr 3 C 2 …

In this work, the features of the phase composition, structures, and properties of coatings
obtained on a high-speed steel substrate (steel R6M5) were studied. The coatings were …

The effect of the delay time before applying pressure on the formability of a TiC–(5–50 wt%)
NiCr–based material and on its phase composition, unit cell parameters, and microstructure …

Thermodynamics of boehmite formation upon hydrothermal treatment of micron-size
particles of hydrargillite and γ-Al 2 O 3 at 200° C in various media has been studied at …

The paper analyzes the structure, and the mechanical and tribological properties of Ti–Cr–C–
Ni–Fe coatings formed on R6M5 high-speed steel in four modes of electrospark deposition …

The aim of this work was to enhance the mechanical and tribological properties of an alpha
titanium substrate by forming a protective cermet coating on its surface. In this study …

The article presents the results of our study of protective cermet coatings obtained by the
method of electric spark alloying on a dental instrument (excavator) using SHS (self …