Ultrasonic rolling refines the surface grains of Ti6Al4V alloy and forms compressive stress.
Spindle speed strongly affects the plastic deformation degree and then changes the surface …

Titanium and its alloys have found very wide application in aerospace due to their excellent
characteristics although their processing is still a challenge. Electrochemical machining is …

In this work, the pack boriding method was used to treat the surface of Ti-5Al-2.5 Sn (TA7)
titanium alloy. The boriding temperatures were selected as 975° C, 1000° C, 1025° C, 1050° …

Plasma electrolytic oxidation (PEO) damages fatigue strength of titanium alloy, ultrasonic
surface rolling process (USRP) pretreatment is used to mitigate this adverse effect. The …

Ultrasonic surface rolling processing (USRP) is a new method to improve the fatigue
performance of titanium alloy, and repeated processing pass is an important factor that …

Surface textures with dimple and groove were fabricated on titanium and its alloy surfaces
by a Nd: YAG pulsed laser. The effect of laser parameters on the two types of texture …

Ti 3 Al coating was in situ synthesized successfully on pure Ti substrate by laser-cladding
technology using aluminum powder as the precursor. The composition and microstructure of …

In this study, the function of rare earth (RE) oxides added in boronizing agents was studied
by analyzing not only the boronized titanium (Ti6Al4V) but also the agent materials at 900 …

This paper presents the results of a study on the high-temperature oxidation characteristics
after mechanical and laser removal of TA15 titanium alloy oxide film. The morphology …

Wear properties of the nonhydrogenated, hydrogenated 0.5 wt%, and dehydrogenated
Ti6Al4V alloys were studied through dry sliding wear tests using an M-200 type pin-on-disk …