Due to its numerous properties, iron is one of the most useful materials on the planet. The
mechanical and physical properties of iron and its alloys are suitable and manageable …

Titanium-magnesium composites have gained increasing attention as a partially degradable
biomaterial recently. The titanium-magnesium composite combines the bioactivity of …

Ti-Al 2 O 3 composites have demonstrated favorable characteristics for use in load-bearing
biomedical implant applications; however, the influence of Al 2 O 3 reinforcement particles …

Abstract Objective Titanium (Ti) is considered bioinert and is still regarded as the “gold
standard” material for dental implants. However, even 'commercial pure'Ti will contain minor …

In this study, monolithic pure Ti and Ti-6Ni-xTiCN composites were fabricated by the spark
plasma sintering method and the mechanical and anti-wear characteristics of the fabricated …

In the present study, a novel titanium matrix composite with a quasi-network structure was
successfully fabricated via the hot-press sintering of the TC4 powder and Ti 2 AlC precursor …

Abstract Al–Ti–Ni coatings were fabricated on S355 structural steel using an arc spraying
(AS) and laser thermal spraying (LTS), and their electrochemical corrosion performances in …

Recent studies have shown that titanium matrix composites have potential for load-bearing
biomedical implants due to their improved tribocorrosion behaviour compared to Ti and its …

TiAl-based composites reinforced with different weight fractions of Al 2 O 3 have been
successfully synthesized by hot-pressing using the pre-alloyed Ti–45Al–7Nb-0.2 B and Nb 2 …

Abstract Ti-XAl-2Fe-3Cu (wt%)(X= 2.7, 4) alloys were fabricated by extrusion of compacts of
TiH 2/Al/Fe/Cu powder blends. The microstructure and compressive and biocorrosion …