Abstract Al-7.3 Zn-2.2 Mg-2Cu alloy is known for its high strength, achieved because of
higher alloying concentration. However, the higher alloying concentration presents …

This work comprehensively studied the microstructure evolution and thermodynamic
behavior of homogenized cast Al-Mg-Si alloy by using the dynamic materials model (DMM) …

Abstract This study utilized Al–Zn–Mg–Cu alloy chips as raw materials to prepare recycled
billets through a solid-state recycling process. Isothermal hot compression tests were …

Isothermal compression tests were executed on an Al-Mg-Si-Zr-Mn alloy using a Gleeble-
3800 thermo-mechanical simulator at temperatures from 400 to 550° C and strain rates …

Thermomechanical processing is a globally practised method for upgraded microstructural
and mechanical characteristics. But the varying strain during thermomechanical processing …

In the presented research, the dynamic working of nickel-based (IN600) superalloy was
performed and the micro-mechanisms affecting the deformation behaviour were closely …

Low sensitivity to hot cracking is very important not only for casting but also for ingots of
wrought alloys. Doping of Al-Cu-(Mg) alloys by eutectic forming elements provides an …

The crankshaft is a critical component in large marine ships, often regarded as the “heart” of
the vessel due to its role in transmitting power and motion. This article addresses the …

Isothermal compression tests were executed on an Al-Mg-Si-Zr-Mn alloy using a Gleeble-
3800 thermo-mechanical simulator at temperatures from 400 to 550◦ C and strain rates …

Thermomechanical processing, a reliable technique, was employed to gain insights into
high-temperature behaviour and optimize its microstructural characteristics. Hot deformation …