In this review article, microstructure and mechanical behavior of the dissimilar welded joint
(DWJ) between ferritic-martensitic steel and austenitic grade steel along with its application …

This paper investigated the microstructure and mechanical properties of 304 stainless steel
joints by tungsten inert gas (TIG) welding, laser welding and laser-TIG hybrid welding. The X …

This paper presents the investigations carried out to study the microstructure and
mechanical properties of AISI 304 stainless steel and AISI 4140 low alloy steel joints by Gas …

Surface modification is essential to safeguard heat exchangers from premature failure
spurred by deterioration mechanisms such as corrosion and wear, which diminish …

The microstructural evolution and mechanical properties of gas tungsten arc welded creep
strength enhanced martensitic (CSEM) and austenitic stainless steel (SS) dissimilar welded …

The effect of grain size on chromium carbide precipitation and sensitization of 316L stainless
steel was investigated based on inspection of microstructures and electrochemical …

In this work, the influence of reversed austenite on the intergranular corrosion of
AM355MSSs (martensitic stainless steels) was investigated. The combined results revealed …

During polarization in 1 M NaCl (pH 5.4), intergranular corrosion of sensitized re-sulfurized
Type 304 stainless steel occurred after pit initiation at MnS inclusions. Intergranular …

In the present research, the hot deformation microstructure of AISI 321 austenitic stainless
steel was studied by performing hot compression tests in the temperature range of 800 …

It is known that some problems commonly arise when welding dissimilar metals, especially
because it is more difficult to join dissimilar metals than similar metals. Therefore, to join …