The challenges and opportunities to alloyed and composite fuel architectures designed and
intended to mitigate oxidation of the fuel during a cladding breech of a water-cooled reactor …

This paper reviews the state-of-the-art engineering approach for using thermal hydraulic
(TH) and neutronics modeling and simulation (M&S) tools to perform rapid screening studies …

Prolonged operations of mixers cause wear of mixer rotors and chamber walls and affect the
clearances between the rotors and chamber walls, which reduce the mixing effect, weaken …

Internal mixer is an important mixing component in industrial applications. Studies show that
when a mixer operates for a long time, wear may appear at the end face of the internal …

The function of silane coupling agent in rubber mixing field is to combine inorganic matrix
with rubber organic matrix. Silica is commonly used in the rubber mixing field to strengthen …

Internal mixer is one the most commonly used rubber‐mixing equipment, which has been
applied for decades. This device can operate continuously for a long time. Accordingly, it is …

Abstract Cr-incorporated UN (Cr-UN) composite fuels with different Cr amounts up to 10 wt%
are fabricated by spark plasma sintering, and their microstructure and phase heterogeneity …

Low enriched uranium (LEU) fuel with different Integral Burnable Absorbers (IBAs) and
Burnable Poison Rods (BPRs) in AP1000 assembly was investigated. These include IBAs of …

As an essential rubber mixing equipment in continuous production, an internal mixer should
have a long service life while operating at high intensity. Studies show that at these severe …

Studies show that long‐term operation of the rubber mixer results in wear at the end face of
the mixer. End face wear increases the gap between the mixing chamber and the end face …