In this study, corrosion behavior of Yb 2 O 3-Y 2 O 3 co-stabilized ZrO 2 (YbYSZ) was
systematically investigated under CMAS melt attack. The result was found that YbYSZ …

At present, in the aviation industry, titanium alloy is mainly used to manufacture parts such
as compressor discs, blades, and the casings of aircraft engines. When titanium alloys are in …

The increased demand for high performance gas turbine engines has resulted in a
continuous search for new base materials and coatings. With the significant developments in …

The thermal cycling behavior of single-phase β-(Ni, Pt) Al coated with and without an APS-
4YSZ ceramic layer was evaluated at 1,100° C. The results showed that the 4YSZ/TGO …

The influence of Si content on the oxidation behavior of the Y-related structure (Ni 5 Y) in
NiAlYSi alloy was investigated. The higher Si content increases the diffusion energy barrier …

The hot corrosion behaviour was investigated for pack-cemented Si-modified aluminide
coating on the K438 Ni-base alloy when covered by NaCl, Na 2 SO 4, and 50% NaCl+ 50 …

A quasi-continuous α-W-based diffusion barrier (DB) forms in-situ between the (Ni, Pt) Al
and the inter-diffusion zone by adding a Ni-W plating layer before the coating preparation …

Refurbishment of thermal barrier coating (TBC) has become a valuable technique to prolong
the service life of high-temperature components. This study investigates the effect of the …

Oxide dispersion strengthened (ODS) NiCoCrAlYTa coatings with different Y 2 O 3 additions
(0, 3, 5 and 10 wt%, respectively) were prepared by electrospark deposition (ESD), and the …

Pt modified CoNiCrAl medium-entropy alloys (MEAs) were optimized that displayed
outstanding long-term oxidation resistance life at 1100° C. Compared to air, introducing …