The effect of transition metal carbides MeC (Me= Ti, Zr, Nb, Ta, and W) on mechanical properties of B4C ceramics fabricated via pressureless sintering

G Liu, S Chen, Y Zhao, Y Fu, Y Wang - Ceramics International, 2020 - Elsevier
In this study, boron carbide-metallic boride (B 4 C-MeB x, Me= Ti, Zr, Nb, Ta, or W)
multiphase ceramics were fabricated via in situ pressureless sintering at 2250° C for 1 h …

[HTML][HTML] W/B short period multilayer structures for soft x-rays

RV Medvedev, AA Zameshin, JM Sturm, AE Yakshin… - AIP advances, 2020 - pubs.aip.org
W/B short period multilayer structures for soft x-rays | AIP Advances | AIP Publishing Skip to Main
Content Umbrella Alt Text Umbrella Alt Text Close Publishers AIP Publishing Physics Today …

Structure and Mechanical Properties of Hot-Pressed Composite Ceramics W2B5–ZrB2–SiC–B4C

DD Nesmelov, SS Ordan'yan, YP Udalov - Refractories and Industrial …, 2021 - Springer
A high-density ceramic material (97% of theoretical density) was obtained by hot pressing of
ball-milled powders W 2 B 5, ZrB 2, SiC and B 4 C with holding for 15 minutes at a …

Synthesis of W2B5 powders by the reaction between WO3 and amorphous B in NaCl/KCl flux

B Dai, X Ding, X Deng, J Zhu, S Ran - Ceramics International, 2020 - Elsevier
W 2 B 5 powder was synthesized by the reaction between WO 3 and amorphous B in
NaCl/KCl flux. The results indicate that appropriate amount of NaCl/KCl flux significantly …

The influence of surface chemical composition of particles of boron carbide powders on their biological properties

E Stodolak-Zych, A Gubernat… - Applied Surface …, 2022 - Elsevier
The aim of this study was to explain differences in the biological behaviour of two boron
carbide powders prepared by different synthesis methods. The commercial powder HD had …

The Effects of Transition Metal Oxides (Me = Ti, Zr, Nb, and Ta) on the Mechanical Properties and Interfaces of B4C Ceramics Fabricated via Pressureless Sintering

G Liu, S Chen, Y Zhao, Y Fu, Y Wang - Coatings, 2020 - mdpi.com
There is little available research on how different transition metal oxides influence the
behavior of B4C-based ceramics, especially for Ta2O5 and Nb2O5. B4C-MeB2 (Me= Ti, Zr …

In situ synthesis of B4C–SiC, B4C–TiB2, and B4C–ZrB2 composites from organic–inorganic hybrid precursor via a simple bottom-up approach

AS Parlakyigit, C Ergun - Journal of Sol-Gel Science and Technology, 2019 - Springer
Boron carbide (B 4 C) and its in situ composites were synthesized via a simple bottom-up
process using low-cost boric acid and a sucrose-based precursor solution with silicon (Si) …

The influence of milling time on boron carbide pressureless and laser sintering

P Zbies, P Rutkowski, D Kata, R Lach - International Journal of Refractory …, 2022 - Elsevier
This paper concerns the influence of increasing the milling time, which is performed by a
high-energetic rotary-vibratory mill and WC-Co balls, on boron carbide sintering. The …

Effect of partial substitution of iron by tungsten on the crystal structure and electronic properties of WB3

J León-Flores, J Rosas-Huerta, M Romero… - Physica B: Condensed …, 2020 - Elsevier
Polycrystalline samples of the W 1-x Fe x B 3 (x= 0.00, 0.15) were synthesized by the first
time by arc melting. The effect of the chemical pressure due to the substitution of tungsten by …

Tungsten Carbides

IL Shabalin - Ultra-High Temperature Materials IV: Refractory …, 2022 - Springer
Tungsten forms with carbon several chemical compounds (see also section C–W in Table I-
2.13): tungsten monocarbide δ-WC1±x phase (hexagonal structured), having almost …