淬火配分(Q&P) 钢属于汽车用第3 代先进高强度钢, 广泛应用在汽车和特种装备领域.
合金元素可以改善Q&P 钢中碳原子配分, 晶粒尺寸, 组织分布形态以及相变温度点等 …

The primary aim of the present study was to investigate the impacts of tempering (at 200–
300° C) on microstructure and mechanical properties of commercial spring steel of …

This investigation proposes a pathway for generating optimum microstructure for a medium
Mn containing twinning-induced plasticity/transformation-induced plasticity (TWIP/TRIP) …

The effect of partitioning conditions during Quenching and Partitioning (Q&P) annealing on
mechanical behavior of cold rolled 0.2 C-2.22 Mn-1.44 Si-0.21 Cr steels was studied. Q&P …

Quenching and partitioning (Q&P) is receiving increased attention as a novel heat treatment
to produce advanced high strength steels (AHSSs) containing martensite/retained austenite …

The quenching and partitioning (Q&P) process has been shown to be quite promising in the
development of a third generation of Advanced High-Strength Steels. As in other …

In the current research, a complex microstructure and crystallographic data were developed
through quenching and partitioning (Q&P) process to improve tensile properties of …

Controlled hot rolling is performed on low carbon Q&P steel and is subsequently followed by
a direct Q&P (DQP) treatment and a separate Q&P treatment (SQP). Two different levels of …

Thermomechanical simulation of quenching, hot stamping, and quenching and partitioning
processes of a high-strength TRIP-assisted steel were carried out in a Gleeble® 3S50 …

In the present investigation, multiphase microstructures containing a combination of ferrite,
martensite, retained austenite and carbides have been produced by altering the cooling rate …