Weldability studies on high entropy alloys are still relatively scarce, delaying the deployment
of these materials into real-life applications. Thus, there is an urgent need for in-depth …

In this study, the rate of dislocation accumulation in the tensile strained twinning induced
plasticity (TWIP) steel was calculated via the X-ray diffraction (XRD) measurements and …

The present work demonstrates a novel interpretation of the effect of well-known heat
treatments of solutionizing (ST) and solutionizing plus aging (T6) along with a newly …

The stacking fault energy plays an important role in the transition of deformation
microstructure. This energy is strongly dependent on the concentration of alloying elements …

A non-equiatomic Fe 50 Mn 30 Co 10 Cr 10 alloy was prepared by laser cladding, and the
effects of boron addition on the microstructure, hardness and abrasive wear-resistance were …

Effects of ɛ martensite on tensile properties and hydrogen degradation behaviors of a high
Mn steel were investigated. For this purpose, a Fe–15Mn–2Cr–0.6 C steel containing …

The influence of post-heat treatment on the microstructure and properties of 4D printed Fe–
17Mn–5Si–10Cr–4Ni (wt.%) shape memory alloy (SMA) produced via a laser powder bed …

The aim of the present work was to study the effect of austenite grain size (AGS) on the
martensite formation in a high-manganese twinning-induced plasticity (TWIP) steel. The …

This study evaluates phase transformation kinetics under ultrafast cooling using
femtosecond X-ray diffraction for the operand measurements of the dislocation densities in …

Abstract High and Medium-Entropy Alloys (HEAs and MEAs) are a novel type of materials,
which due to the reduction in configurational entropy, can offer an excellent combination of …