Magnesium alloys have found widespread application in various industries, mainly due to
the combination of low density, the best structural material known today, and high strength to …

Abstract WC-Cr 3 C 2–Ni coating was deposited on SK5 steel substrate by high velocity air
fuel (HVAF) spraying. The effect of vacuum heat treatment temperature on the phase …

Conventionally, bulk WC and Cr 3 C 2-based carbide compositions have been used
independently of each other. However, recent investigations have begun to explore …

To optimise spray parameters for fabricating well-bonded and less decarburised coatings,
the morphologies and cross-sectional microstructures of powders and splats, in addition to …

The thermal spray coatings are commonly employed in slurry pump components and
hydrodynamic turbine blades, where wear progression is an intricate phenomenon. In this …

In this paper, three commercial cermet powders, WC-Co-Cr, WC-Co and WC-Cr3C2-Ni,
were sprayed by the High Velocity Oxy Fuel (HVOF) method onto magnesium alloy AZ31 …

The study investigated the microstructures, residual stress and mechanical properties of
double carbides cermet coatings manufactured on AZ31 magnesium alloy substrate by high …

To reduce the decarburization of WC, the core-shell WC-16Cr 3 C 2-10Co4Ni-La 2 O 3
(named as WC-Cr 3 C 2-CoNiLa in following) powder was prepared through second …

Plasma spray coating with ceramic carbide is a promising approach for improving the
surface quality of the materials. In this work, the effectiveness of tungsten carbide (WC) …

The steady-state composition and microstructure of 42 wt% WC-42 wt% Cr 3 C 2–16 wt% Ni
coatings sprayed under “low”,“medium” and “high” thermal input conditions was explored …